The Multi Cleaner is a heavy duty mobile vacuum cleaning unit with inbuilt galvanised storage heavy duty tank
Dual off road axles are fitted
A hand start diesel engine belt drives a vane vacuum pump via an automatic clutch that creates the vacuum inside the storage tank.
The pump may also be used to help discharge the cargo inside the storage tank.
THE USUAL PRECAUTION MUST BE TAKEN WHEN HANDLING FLAMMABLE LIQUIDS/VAPOURS
Two hand tools are provided – one for cleaning into crevices and the other for paving areas.
Construction is of galvanised steel with fasteners of 304SS as far as possible.
Camlock couplings are installed throughout for easy connections.
A storage rack is built onto the tank to facilitate hose storage – 40mm/50mm diameter -20m long
A 900 litre /1800 litre steel tank is bolted onto the trailer and provided with two flange connections at the top, one drain point at the lower rear and 500mm diameter flange clean-out connection centrally rear.
An automatic vacuum release is built into the top of the tank and installed through the 200mm flange opening. A float is built into this unit that lifts the O-ring seal when the tank is nearly full. Thereby releasing the vacuum to the hand tool.
Pressure and vacuum relief valves are fitted to the tank inlet piping (preset). An isolating valve is also built in together with air filter.The tank and power unit are mounted on a heavy duty off road trailer, which is hot dipped galvanised