Australia's #1 industrial directory for equipment & suppliers

Multispiral | Diehard H12D

Supplier: Ryco Hydraulics

Meets or exceeds the performance requirements of SAE 100R12, AS 3791 100R12, EN856 Type R12, EN 856 Type 4SP (-12 and above), ISO 3862 Type R12.

CONTACT THIS SUPPLIER TO FIND OUT MORE

Recommended For:
Very high pressure hydraulic oil lines, in applications where the outside cover of the hose is subject to abrasion that may cause premature failure of standard hoses.
The very high abrasion resistant properties of the cover, combined with the extra high working pressures and excellent impulse life when tested to SAE 100R12 test conditions result in, increased service life and minimise equipment downtime.

Tube:
Black, oil resistant synthetic rubber.

Reinforcement:
Four alternating layers of spiralled high tensile steel wire.

Cover:
Black, extra abrasion resistant and oil resistant synthetic rubber.
“FRAS” Flame Resistant and Anti-Static.
The maximum weight loss of the cover under ISO 6945 method of test for abrasion resistance is less than 10% (less than 0,10 g) of that allowed by DIN 20023 and EN 856.
Highly visible layline branding for easy and permanent identification.
No skiving required with T700 Series BITELOK Crimp Couplings. 
 
Temperature Range:
From -40°C to +121°C (-40°F to +250°F).
For water, emulsions etc. click to view

Working Pressure:
Maximum working pressures are based on 4:1 safety factor (minimum burst to maximum working pressure).

Flame Resistance:
Complies with Flame Resistant and Electrical Resistance (Anti-Static) requirements of Australian Standard AS 2660 and Methods of Test AS 1180.10B and 13A.
Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more