Extremely high pressure hydraulic oil lines, in applications where the outside cover of the hose is subject to abrasion that may cause premature failure of standard hoses.
The very high abrasion resistant properties of the cover, combined with the extra high working pressures and excellent impulse life when tested to SAE 100R13 test conditions result in, increased service life and minimise equipment downtime.
Black, oil resistant synthetic rubber.
- Sizes -12 & -16:
- Four alternating layers of spiralled high tensile steel wire.
- Sizes -20 to -32:
- Six alternating layers of spiralled high tensile steel wire.
Black, extra abrasion resistant and oil resistant synthetic rubber.
“FRAS” Flame Resistant and Anti-Static.
The maximum weight loss of the cover under ISO 6945 method of test for abrasion resistance is less than 10% (less than 0,10 g) of that allowed by DIN 20023 and EN 856.
Highly visible layline branding for easy and permanent identification.
No skiving required with T900 Series BITELOK Crimp Couplings.
From -40°C to +121°C (-40°F to +250°F).
For water, emulsions etc. click to view
Maximum working pressures are based 4:1 safety factor (minimum burst to maximum working pressure).
Complies with Flame Resistant and Electrical Resistance
(Anti-Static) requirements of Australian Standard AS 2660 and Methods of Test AS 1180.10B and 13A.
Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.