The growth of the spill control industry and related legislation has seen the rapid growth of spill management suppliers. The question is how do you find what is right for you.
In September 2001 the then Minister for Environment and Heritage Senator Robert Hill and Senator Nick Minchin released a joint press release regarding an action agenda to assist the Environment Industry to reach a target of $40 billion in annual sales by 2011.
In 2008 we are more than halfway through this action agenda and the Environment Industry continues to show strong growth as it moves towards this target. The understanding that environmental issues present business with more of an opportunity than a compliance cost, as well as the increase in environment protection legislation, has helped to drive this industry forward.
The spill control sector is an important part of the overall industry and a critical segment of any organisation’s environment protection strategy but remains largely unregulated. In this unregulated environment, there are 4 important questions that consumers need to ask when buying spill control equipment to ensure due diligence is being exercised.
1. Why do I need spill control equipment?
One common thread that runs through the various state environment protection legislations is the obligation for all businesses and individuals to exercise their General Environmental Duty. The Environment Protection Act 1994 defines this as,
“A person must not carry out any activity that causes, or is likely to cause, environmental harm unless the person takes all reasonable and practicable measures to prevent or minimise the harm”.
If a pollution incident occurs and the responsible company is unable to provide evidence that the General Environmental Duty has been observed, maximum penalties of up to $5 million and 7 years imprisonment are available to the courts.
2. How much spill control equipment do I need?
In section 2.3.4 (Spillage Control) of The Australian Standard AS1940-2004 for The Storage and Handling of Flammable and Combustible Liquids states that all spills and leaks shall be cleaned up immediately. Liquids should not be allowed to flow into drains or onto neighbouring land, or enter any creek, pond or waterway.
When recommending the amount of spill control equipment required, AS1940-2004 states, “Precautions should be based at least on the loss of contents of the largest container kept.”
Mobile bins are a common spill kit container but the size of the container that a spill kit is packed into does not reflect its ability to absorb a certain amount. Always ask your spill control provider what the absorbent capacity of the spill kit is. It is important that your supplier can support these claims by providing you with a copy of maximum sorbency testing results from an accredited laboratory.
3. Is training provided?
The Department of Environment and Climate Change (DECC) conducted compliance audits on 52 licensed management facilities and 10 non-licensed
premises that store and handle liquid chemicals and manage spills. On a number of the audited sites it found appropriate training had not been provided. The final report identified the need for, “developing and implementing procedures to train staff in spill management and the use of
As with all emergency response equipment, staff must be trained in correct deployment in the event of an incident occurring. As well as providing a thorough understanding of how to correctly use the on-site spill control equipment, the training should also make staff aware of how the legislation applies to both them and the company. This is critical as there are responsibilities and liabilities carried by both individuals and the site occupier and ignorance of the law is no excuse.
Due diligence requires spill control suppliers to include complete product training to assist with achieving best environmental outcomes.
4. How do I dispose of used absorbents?
Whenever waste is generated, it must be deposited into the correct waste stream. The type of liquids absorbed and the amount of contaminated absorbents will determine the waste stream into which the used absorbents must disposed of.
All states apart from Northern Territory provide documented waste disposal guidelines to ensure correct disposal of oil soaked waste. There are slight differences in these guidelines from state to state. The common principals shared by these guidelines are up to 100kg of oil soaked waste can be disposed of as solid or inert waste provided that there are no free liquids present.
The test method required by these guidelines to show that there are no free liquids is the USEPA Paint Filter Liquids Test – Method 9095A. Ask your spill control provider to supply you with the document that establishes that the absorbents they offer meet this requirement. If they are unable to provide this documentation, the consumer may be vulnerable to prosecution for illegal dumping of waste.
The DECC issued a document entitled, “General Approval of the Immobilisation of Contaminants in Waste”. This document sets out the requirements that must be met in order for general hydrocarbons (C10-C36) to be disposed of as inert or solid waste. One of the requirements of this disposal method is that the absorbent used must be “capable of securely containing more that 100% of their own mass of such hydrocarbons.” This means that 1kg of absorbent must be able to securely absorb 1kg of oil. Currently there is no commercially available “kitty litter” style absorbent that is able to meet this requirement. Consumers should be aware that if they dispose of oil soaked absorbents as inert or solid waste that do not meet the DECC requirements that they may be liable to prosecution for illegal dumping of waste.
Regardless of what bacteria or enzyme is added to the absorbent, disposal of waste in any method other that what is stated in the guidelines is an offence.
By asking your spill control provider these 4 important questions you can feel secure in the knowledge that due diligence is being exercised and that the correct tools for effectively addressing an emergency spill incident are on hand.
Rapid Spill Control can answer all of these questions for you and ensure you get the right equipment to provide your best spill management outcomes.