Patlite Signal Tower with LAN/Ethernet/Network Monitoring | LA6-POE for sale from PATLITE SIGNALS DISTRIBUTION BY JTEC

164 Recent Views In Stock

The Patlite LA6-POE LA6 Power Over Ethernet LED Signal tower from JTEC Corporation Australia allows you to connect and communicate to this SMART LED Signal tower system over any internet connection, using the LAN / Ethernet cable. Works remotely over any network by command, and with any application.

Patlite LA6-POE features:

LED Signal tower can be programmed to with 21 various colour options to trigger any pattern of your choosing, remotely via various protocols
Hosts an array of colours, programmable in multiple ways, and in any stack combination
Re-programming of patterns and colours can be done remotely also via accessing the unit via IP address, and can save on cost as you do not have to replace the LEDs. Each LED section is multi colour, and lens is clear and changeable via software or IP access
Built in count down timer which can trigger time based operations or cycles 'TAKTO TIME'. You can also have the whole tower light up in one colour, then have the entire stalk to change to another colour by programming colours in groups and programming to the memory of the light unit
Flexible unit
Necessary tool to assist you in bettering response time to critical alerting of situations, calls, processes, emergency, or any thing else, or any device or software. IT, Industrial or commercial
In the "Smart Mode", various displays can be shown, such as a slow flashing rate, simulating that of a firefly and a display that can be used as a level meter. In addition to the signal line input control, since it is compatible with the Power over Ethernet (henceforth, PoE), it can be operated through a LAN Cable, using Modbus/TCP protocol, to acquire signal tower status conditions via the network, and control it in the Signal Tower Mode or Smart Mode
Can use the mirroring function, in which one signal tower can show the same status as the other, but in a different location
Since the Signal Tower is the LA6, the dedicated application software, "EDITOR for LA series" can be used to reflect the setting data via the network

Applications:

Software
Infrastructure
Machine
Process
Security
IT
PLC monitoring in any industry, any software, machine or system

Specifications:

DIMENSIONS	60mm Diameter
OPERATING VOLTAGES	24V DC Power over Ethernet (PoE): 48V DC
FUNCTIONS	Operational Method: Signal Wire Control Command Control
BODY STYLE	TN : Direct Mount Type SN : Stationary Type
BODY COLOR	Off-white Only
STACKABLE TIERS	5 Tier Only
MODULE COLORS	Display Color Variations Signal Tower Mode: 9 Colors Smart Mode: 21 Colors
AUDIBLE STYLE	11 alarm sounds available
CONFORMITY STANDARDS	EMC Directive RoHS Directive UL 508 FCC KC
PROTECTION RATINGS	IP54 (IEC 60529)

To contact PATLITE SIGNALS DISTRIBUTION BY JTEC about Patlite Signal Tower with LAN/Ethernet/Network Monitoring | LA6-POE use Get a quote.

Patlite LA6-POE features:

LED Signal tower can be programmed to with 21 various colour options to trigger any pattern of your choosing, remotely via various protocols
Hosts an array of colours, programmable in multiple ways, and in any stack combination
Re-programming of patterns and colours can be done remotely also via accessing the unit via IP address, and can save on cost as you do not have to replace the LEDs. Each LED section is multi colour, and lens is clear and changeable via software or IP access
Built in count down timer which can trigger time based operations or cycles 'TAKTO TIME'. You can also have the whole tower light up in one colour, then have the entire stalk to change to another colour by programming colours in groups and programming to the memory of the light unit
Flexible unit
Necessary tool to assist you in bettering response time to critical alerting of situations, calls, processes, emergency, or any thing else, or any device or software. IT, Industrial or commercial
In the "Smart Mode", various displays can be shown, such as a slow flashing rate, simulating that of a firefly and a display that can be used as a level meter. In addition to the signal line input control, since it is compatible with the Power over Ethernet (henceforth, PoE), it can be operated through a LAN Cable, using Modbus/TCP protocol, to acquire signal tower status conditions via the network, and control it in the Signal Tower Mode or Smart Mode
Can use the mirroring function, in which one signal tower can show the same status as the other, but in a different location
Since the Signal Tower is the LA6, the dedicated application software, "EDITOR for LA series" can be used to reflect the setting data via the network

Applications:

Software
Infrastructure
Machine
Process
Security
IT
PLC monitoring in any industry, any software, machine or system

Specifications:

DIMENSIONS	60mm Diameter
OPERATING VOLTAGES	24V DC Power over Ethernet (PoE): 48V DC
FUNCTIONS	Operational Method: Signal Wire Control Command Control
BODY STYLE	TN : Direct Mount Type SN : Stationary Type
BODY COLOR	Off-white Only
STACKABLE TIERS	5 Tier Only
MODULE COLORS	Display Color Variations Signal Tower Mode: 9 Colors Smart Mode: 21 Colors
AUDIBLE STYLE	11 alarm sounds available
CONFORMITY STANDARDS	EMC Directive RoHS Directive UL 508 FCC KC
PROTECTION RATINGS	IP54 (IEC 60529)