Novaflex One Part Ceramic Tile Adhesive

Read more...

Need more information? Message FireCrunch Australasia Pty Ltd via the form, or call and say you found them on IndustrySearch so they can best assist you.

Benefits

• NovaFlex can be used for internal and external
  wall and floor applications
• NovaFlex can be applied over most acrylic
  based waterproofing membranes, Contact the
  manufacturer prior to commencing application.

Application

• Once the substrate has been appropriately prepared in accordance with the
  above instructions then apply the adhesive onto the surface.
• For floor tiles up to 330 x 330 in size, a 10mm trowel should be used, For
  larger tiles a 12mm trowel should be used.
• A 6mm trowel should be used when tiling Mosaics on the floor.
• For wall tiles up to 200 x 250 in size, a 6mm trowel should be used, for
  larger tiles an 8mm to 10mm trowel should be used
• Do not apply more than 1m2 of NovaFlex at a time, applying rates greater
  than this could result in adhesive skinning over
• To ensure no voids occur and full coverage of adhesive is achieved, press
  tile into adhesive giving a twisting and front and back sliding motion.
• For tiles with uneven or lugs on the rear, it may be required to butter the
  rear of the tile in addition to applying adhesive on the substrate.
• Adhesive bed thickness should be at least 2 to 3mm.
• Commence grouting after 6-8hrs when tile work is firm (refer to grout data
  sheet for correct applications).

Read less...

Need more information? Message FireCrunch Australasia Pty Ltd via the form, or call and say you found them on IndustrySearch so they can best assist you.