NuWave Base is inexpensive and very easy to cut and install. Fabric backed, embossed face, it is tear resistant, highly flexible and is supplied in rolls.
Roll Sizes And Acoustic Ratings (all 1350mm nom.width):
4kg/m2 5 mtr rolls Rw 26*
6kg/m2 3 mtr rolls Rw 29*
8kg/m2 3 mtr rolls Rw 30*
*Rw rating is a single number quantity summarizing the transmission loss of a material over the frequency range from 100Hz to 3.15 kHz under AS/NZS 1276.1:1999. Independent test reports available.
NuWave’s 4-Zero barrier is the same as the “Base” product but with a flexible aluminium film facing. The aluminium facing gives the barrier excellent fire resistant properties when tested to AS 1530.3.
This additional flammability rating is important in some applications in buildings and the foil facing also allows reinforced foil tapes to be used to join two pieces of 4Zero together when overlapped. Roll Sizes and acoustic ratings as for “Base” above.
Thermotec Australia Pty Ltd | Insulation & Foam Products
Australia's number 1 manufacturer of closed cell polyethylene foam.
E-therm is a thin insulation that works by creating highly reflective airspaces. It can be used in Domestic, Commercial and Horticultural building applications. E-therm is made using quality materials, and incorporates a bimetallic highly reflective aluminium film that sandwiches a low conductive layer of low density closed cell polyethylene foam. This foam has very low rate of conduction, effectively reducing the amount of heat transmission into the building. E-therm also acts as a vapor barrier reducing the passage of moisture and dust particles into the roof and wall cavities.
Effective Thermal and Acoustic Insulation
Made using Recycled materials
- Fibre free - safe to install
- Insulation lowers your carbon footprint
- Made in Australia
- Meets or exceeds Australian Standards
- Will not absorb moisture
- Maintains original structure
- Protecting your home from Wind, Dust, Noise and Solar Radiation