Home Trusted by 500,000+ buyers

One Wire Braid | Diehard T1D

Supplier: Ryco Hydraulics

Meets or exceeds the performance requirements of SAE 100R1AT, AS 3791 100R1AT, DIN 20022-1SN, EN 853 Type 1SN, ISO 1436 Types R1AT & 1SN.

Price Guide: POA

Recommended For:
High pressure hydraulic oil lines in applications where the outside cover of the hose is subjected to abrasion that may cause premature failure of standard hoses.
The very high abrasion resistant properties of the cover, combined with the high working pressures and excellent impulse life when tested to EN 853 Type 1SN/SAE 100R1AT test conditions result in, increased service life and minimise equipment downtime.

Black, oil resistant synthetic rubber. (Nitrile).

One braid of high tensile steel wire.

Black, extra abrasion resistant and oil resistant rubber.
“FRAS” Flame Resistant and Anti-Static.
The weight loss of the cover under ISO 6945 method of test
for abrasion resistance is less than 10% (less than 0,05 g)
of that allowed by DIN 20022-1SN and EN 853 Type 1SN.
Highly visible layline branding for easy and permanent
No skiving required with T200 & T700 Series BITELOK Crimp
Couplings and K Series Field Attachable Couplings.
 Temperature Range:
From -40°C to +100°C (-40°F to +212°F).
For water, emulsions etc. click to view

Working Pressure:
Maximum working pressures are based on 4:1 safety factir (minimum burst to maximum working pressure).

Flame Resistance:
Complies with Flame Resistant and Electrical Resistance (Anti-
Static) requirements of Australian Standard AS 2660 and
Methods of Test AS 1180.10B and 13A.
Meets Flame Resistant Designation “U.S. MSHA” of the US
Department of Labor, Mine Safety and Health Administration.