Order Picking Trolley | Bookshelves Sorting ...
Call
Bookshelves Sorting Trolley
Order Picking Trolley | Bookshelves Sorting
Base frame made of square tube, side sections with wire grate. Mountable sheet metal shelves with 19 adjustable dividers. Safety grate acts as heel protectors while pulling. Ergonomic push bar handle. Anti-static strap. The screwed in top shelf with mesh can be omitted if the lattice back panel is used.
Four swivel castors, including two that can be locked to function as fixed castors. Rubber tread.
Base frame is high-gloss galvanised and chrome-plated. Shelves and dividers are made of galvanised sheet metal. Push bar handle, heel protectors and bar for setting the direction are coated in plastic powder in RAL 2008 Bright red orange.
The push bar handle has been designed so that it offers different gripping heights depending on the size of the employee. Both sides of the bar are inclined toward the centre, preventing risk of injuries from knuckles protruding from the sides.
The sheet metal dividers can be adjusted or stacked on top of each other depending on the order volume. They can also be variably distributed across the shelves. A guide bar keeps the compartment dividers from falling out.
The wire grate in front of the castors beneath the handle protects the feet when pulling the trolley.
Simply press the foot-operated rail down and the directional lock transforms the two swivel castors into fixed castors by locking them. This ensures more directional stability while manoeuvring.
| Length | 1,411 mm |
| Width | 607 mm |
| Height | 2,073 mm |
| Total load capacity | 250 kg |
| Load capacity per shelf | 50 kg |
| Mesh size | 50 x 52.5 mm |
| Weight | 95 kg |
|
|
Wanzl | Shop Fixtures & Fittings |
Need more information? Message Wanzl via the form, or call and say you found them on IndustrySearch so they can best assist you.
QUICK RESPONSE FORM
