The Origo Mig L405 welding package is ideal for welding applications within general steel fabrication, the vehicle industry and household and furniture manufacturers.
The package consists of the Origo Mig L405 power source, Origo Feed L302 or L304 wire feed units, a connection set (1.7 m, 5.0 m or 10.0 m) and the PSF welding torch.
Reliable and easy to use
Origo Mig L405 and L405w are step-controlled power sources for MIG/MAG welding. 40 voltage steps provides accurate setting for even the most critical applications.
Both Origon Mig L405 and Origon Feed are designed with sturdy galvanised metal casing. Electronically controlled feeding gives accurate and stable arc. The 4- wheel feed mechanism has grooves in the feed roller and idle pressure roller with ball bearing, which provides a positive and stable feeding combined with low wear on the wire. The 2-wheel feeder mechanism is a cost efficient solution for wire dimension up to 1,2 mm.
The feeders are available with 030 mm feed rollers for wires up to 01.2 mm (L302) and 01,6 mm (L304).
Wire feed speed, 2/4 stroke, creep start, spot welding, inching, gas purge and burnback time setting are made on the front panel of the feeder, giving a good overview of the settings. Voltage setting and inductance adjustments are made on the power source.
- The easy to install Plastic bobbin option can protect the wire spool from dirt and dust.
- Extra versatility is provided by the three wire feed mounting options; counterbalance and mast, wheel kit or a suspension bracket.
- As an option the Origo Mig L405 can be equipped with V/A digital meter and transformer for CO2 heater.
- General steel fabrication
- Vehicle industry
- Household and furniture