Pacific Hydraulic Panbrake Get latest price

Pacific Hydraulic Panbrake

34 Recent Views In Stock

Specifications:

•  4mm x 2450mm (8ft)
• Hydraulic Clamp and unclamp from foot switch.
• Final Clamping is limited to 10mm increments for safety
• Fingers are high carbon steel, Apron blade high carbon tensile steel 20mm and segmented both are hardened and ground for repeat accuracy.
• 24 Volt to foot switch. Overload protected
• Clamping provided by 2 rams, oil delivered through steel pipes. Hydraulic clamping of top beam with 13 individual segmented finger clamps.
• Unclamp is controlled, to allow the operator to regulate the open height.
• Apron bed is segmented 11 individual adjustable segments for return fold down of 50mm suitable for splash backs & TDF etc.
• Automatic and manual control. In auto cycle after clamping start auto apron will come up to angle programmed, apron will return and the head will unclamp by foot pedal control
• Safety trap bar on apron
• Motor 5.5Kw
• Length – 3.5 metres
• Width – 1 metre
• Height – 1.5 metres
• Weight – 3ton

Structural and Operating Features:

• Hydraulically operated bending and clamping beam for efficient heavy duty operation
• High structural rigidity from heavy plate steel box construction with continuous welded seams
• Bending beam powered by dual hydraulic cylinders.
• Fully integrated and enclosed electric/hydraulic system with large oil reservoir to maintain low oil temperature.
• Powerful hydraulic pump provides rapid operation with timer for bend angle
• High load capacity dual spherical plane bearings utilized at bending beam pivots and over-center clamp     bearings
• Precise electric/hydraulic controls with manual inching of bending beam
• Comprehensive equipment protection from electric and hydraulic overload systems.

 

Read more...

To contact PML Machinery about Pacific Hydraulic Panbrake use Get a quote.

Specifications:

•  4mm x 2450mm (8ft)
• Hydraulic Clamp and unclamp from foot switch.
• Final Clamping is limited to 10mm increments for safety
• Fingers are high carbon steel, Apron blade high carbon tensile steel 20mm and segmented both are hardened and ground for repeat accuracy.
• 24 Volt to foot switch. Overload protected
• Clamping provided by 2 rams, oil delivered through steel pipes. Hydraulic clamping of top beam with 13 individual segmented finger clamps.
• Unclamp is controlled, to allow the operator to regulate the open height.
• Apron bed is segmented 11 individual adjustable segments for return fold down of 50mm suitable for splash backs & TDF etc.
• Automatic and manual control. In auto cycle after clamping start auto apron will come up to angle programmed, apron will return and the head will unclamp by foot pedal control
• Safety trap bar on apron
• Motor 5.5Kw
• Length – 3.5 metres
• Width – 1 metre
• Height – 1.5 metres
• Weight – 3ton

Structural and Operating Features:

• Hydraulically operated bending and clamping beam for efficient heavy duty operation
• High structural rigidity from heavy plate steel box construction with continuous welded seams
• Bending beam powered by dual hydraulic cylinders.
• Fully integrated and enclosed electric/hydraulic system with large oil reservoir to maintain low oil temperature.
• Powerful hydraulic pump provides rapid operation with timer for bend angle
• High load capacity dual spherical plane bearings utilized at bending beam pivots and over-center clamp     bearings
• Precise electric/hydraulic controls with manual inching of bending beam
• Comprehensive equipment protection from electric and hydraulic overload systems.

 

Read less...

To contact PML Machinery about Pacific Hydraulic Panbrake use Get a quote.