With a load capacity to 2450N and speeds up to 5m/s, LEB100’s are optimized for high speed, single or multi-axis systems
The HLE series ‘all-purpose’ linear actuator offers an appropriate solution for all motion tasks and is ideal for use as a single-axis or as a component in a multiple-axis gantry system. It has been developed for rapid linear movements over long stroke distances, providing a simple machine and system element that can be used without the need for any specialized knowledge – installation and setup only requires a small amount of effort from the user.
The HLE carriage is rigidly supported on three sides by heavy duty, polyamide roller wheels housed inside of a rugged aluminium housing. The bearing wheels are pre-loaded to eliminate play in the system and strategically located along the carriage to evenly distribute load across the length of the carriage.
The HLE linear actuator utilises a high strength, steel reinforced belt and pulley drive train that provides fast, highly repeatable positioning of the carriage. The mounting of the belt to the carriage is designed to enable easy replacement of the belt without the need to remove the payload, while simultaneously providing a very rigid connection. The drive pulley assembly is designed to accept planetary gearheads as well as a wide variety of servo and stepper motors.
The HLE is available in many different configurations, with numerous options and accessories – with thousands of units in operation worldwide, the HLE is truly a proven performer in its ability to offer long-life and trouble free operation.
Profile Width : 100 mm
Maximum Load Capacity : 2450 N
Thrust Forces : up to 580 N
Travel Lengths : up to 6.3 m (single profile) / 13 m with profile splicing (consult factory)
Speeds : up to 5 m/s
Accelerations : up to 10 m/s²
Typical Repeatability : ± 0.05 mm (for travel lengths up to 3m) / ± 0.1 mm (for travels lengths over 3m)
Plastic Guiding Rollers – suitable for clean operation (travel surface is free of lubricants),
Rugged Construction – for heavy duty applications
Timing Belt and Pulley Drive Mechanism – for fast, accurate positioning
Steel Strip Cover – for additional environmental protection
Suitable for Cleanroom Applications – low wear and low particle generation,
Stainless VA / Corrosion Resistant Version – for use in cleanroom applications, or in the food industry
Dual-Axis and Idler Unit Options Available
T-slot Mounting along actuator body and carriage
Motion Solutions Australia Pty Ltd | Precision Automation Equipments
Motion Solutions Australia established in 1989, provide high quality, reliable and cost effective, precision automation equipment to ensure higher productivity for your company.
Our clients include all industry sectors with applications covering multiaxis synchronisation, web tension control, electronic gearing, indexing, computer control and interfacing, and operator interfacing.
If you have any applications you would like to discuss, please do not hesitate to contact our applications engineers, who would be more than happy to provide you with a solution.