Perma Pro MP2
The Pro MP2 system is a stand alone, battery powered system. Meanwhile, the Pro-C MP2 is a PLC controlled system. The Pro-C (C for Control) is primarily designed for machines which stop for extended durations of time, during which time the lubrication system goes into a "waiting mode" and does not discharge again until the machine recommences operation. In addition to this feature, the system status can be monitored via a PLC-control system (eg. warning lights).
The pressure output from each outlet of the MP6 is 25 bar which allows grease lines up to 5 meters in length to be installed from each of the six outlets.
Performance Features and Benefits:
- Intelligent lubrication of two points
- 25 bar pressure output allows the flexibility of grease lines up to 5 meters in length
- Can be programmed to deliver the full volume of grease at multiple time settings up to 24 months
- Simple to operate splitting device
Lubrication systems should be mounted in IP 66 cabinets for outdoor operation or in indoor environments where high levels of dirt and water are anticipated.