Drum seal inert clay temporarily seals cracks and small holes in tanks, drums and machinery.
- Drum seal is a premixed bentonite clay paste for temporary sealing of cracks and small holes in tanks and drums.
- Simply push clay into the crack or hole and mould the clay to form a seal.
- Paste will temporarily stop leaks until the drum or tank can be drained or transported into an isolated containment area.
- Drum seal inert clay is resistant to a wide range of oils, fuels and chemicals.
Instructions for use:
Remove sufficient quantity of putty from container to cover hole and up to 50mm of area around it. Clean area surrounding hole, keeping it as dry as possible. Place putty over hole and push firmly onto surrounding surface – ensure strong bond is achieved (push putty down and away from hole). If putty is not sufficiently pliable when removed from container, mix with small quantity of fresh water to moisten.