Australia's #1 industrial directory for equipment & suppliers

Pipette calibration balances

Supplier: Sartorius Mechatronics Australia

Pipette calibration balance with no draft shield for fast, ergonomic and mobile calibration of pipettes in all sizes; equipped with an evaporation trap to reduce error caused by loss of liquid.

CONTACT THIS SUPPLIER TO FIND OUT MORE

The balances in the GPC series are ideally suited for gravimetric testing of the volume of any pipette size. A choice of sampling containers with capacities of 6 ml and 21 ml, respectively, enables you to test pipettes with a volume of up to 1,000µl, depending on the balance model you use. If you need to test volumetric apparatus that have a relatively high capacity, an optional 50 ml sampling container with a special pipette draft shield is available for GPC65-CW and GPC225-CW models.

Because these balances do not require an additional standard draft shield, this eliminates the need for opening and closing draft shield doors and saves considerable time. The calibration workstation’s modular design can be optimally adapted to your lab staff’s ergonomic needs.

Because the balances are standard-equipped with an evaporation trap, the humidity inside the sample chamber is maintained at 60 - 90% . Therefore, this prevents loss of liquid from the sampling container.

With the optional YDB01WZA carrying case, you can pack up your GPC pipette calibration balance along with the other accessories. Ambient conditions allowing, you have everything you need to calibrate your pipettes directly at the place of use.


 
 
  • Easy pipetting without an interfering external draft shield chamber
  • Consistently fast readouts, as there is no external draft shield chamber and therefore no more waiting after you open or close it
  • Flexible, ergonomic setup of your work area thanks to modular design
  • Minimizes errors caused by loss of liquid as the evaporation trap helps maintain the liquid volume
  • Built-in motorized weight for calibration/adjustment at the press of a key

The balances in the GPC series are ideally suited for gravimetric testing of the volume of any pipette size. A choice of sampling containers with capacities of 6 ml and 21 ml, respectively, enables you to test pipettes with a volume of up to 1,000µl, depending on the balance model you use. If you need to test volumetric apparatus that have a relatively high capacity, an optional 50 ml sampling container with a special pipette draft shield is available for GPC65-CW and GPC225-CW models.

Because these balances do not require an additional standard draft shield, this eliminates the need for opening and closing draft shield doors and saves considerable time. The calibration workstation’s modular design can be optimally adapted to your lab staff’s ergonomic needs.

Because the balances are standard-equipped with an evaporation trap, the humidity inside the sample chamber is maintained at 60 - 90% . Therefore, this prevents loss of liquid from the sampling container.

With the optional YDB01WZA carrying case, you can pack up your GPC pipette calibration balance along with the other accessories. Ambient conditions allowing, you have everything you need to calibrate your pipettes directly at the place of use.


 
 
  • Easy pipetting without an interfering external draft shield chamber
  • Consistently fast readouts, as there is no external draft shield chamber and therefore no more waiting after you open or close it
  • Flexible, ergonomic setup of your work area thanks to modular design
  • Minimizes errors caused by loss of liquid as the evaporation trap helps maintain the liquid volume
  • Built-in motorized weight for calibration/adjustment at the press of a key
Pipette calibration balances without an interfering external draft shield chamber for fast, ergonomic and “On the Go” pipette calibration.


 

 


 


 

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more