Quick and easy to use setting of the depth of cut on the infeed table, titable planer fence and the Felder quick change knife system are all standard with every planer-thicknesser from the Felder Group.
Surface planer table length 3000 mm The solid, heavy ribbed symmetrical cast iron planer tables have a total length of 3000 mm The total length of the infeed planer table is 1800 mm
Format-4, perfect planing technology- suitable load distribution! For decades the Format-4 system with double sided disposable planer knifes proved its advantages. Perfectly manufactured and adjusted in the factory, there is no need to adjust the planer knives, and no expensive adjusting tools have to be purchased.
It’s simple to change the planer knives. In less than a few minutes you can change the 4 knife cutterblock. Format-4 planer knives are set and ready to use! Your Format-4 can also be equipped with a standard or tersa knife cutterblock
8 mm depth of cut Quick and accurate adjustment of cutting depth from the operator side of the infeed table.
The large readout scale ensures that the depth of cut can be set extremely accurately The depth of cut can also be adjusted by "Power Drive" as an option
Set the depth of cut at the touch of a button with "Power-Drive" On demand the depth of cut can be set on the in-feed table at the touch of a button Turn the control knob for quick adjustment, and push the button for fine adjustment. The LED display clearly shows the actual value.
The planer fence: A masterpiece of engineering providing stability, precision and performance. The planer fence may be tilted to any angle between 90° and 45°. End stops are placed at 90° and 45°.
Even more comfort and safety The plan 51 L - planer fence can also be upgraded to the Aigner combi-planer fence.
Felder Group Pty Ltd | Industrial Woodworking Machines
Tradition – Innovation – Perfection: A risk-free decision
Woodworking machines from the FELDER-GROUP are the result of the 50 years experience in machine construction and a desire to improve even further.
Machine construction and metal processing have been tradition in the Felder family for generations.Our woodworking machines are 100% developed and produced at the Felder Group factories in Hall in Tyrol. The areas of research and development, production techniques and assembly, marketing, advertising, sales and service, as well as apprentice training and schooling are traditionally the most important pillars of our international enterprise.