The PTM 72 tool uses the same ‘twin motor’ handle as the PTM 52 but is fitted with a 72mm gearbox to allow higher torque outputs. Low vibration and a gearbox that rotates independently from the handle makes this tool comfortable and safe to use. The 1000N.m version has a free speed of 140rpm for rapid both run-down.
No impacting means less damage to the tool, socket and bolted assembly. These two factors make Pneutorques comfortable for the operator to use, reducing fatigue and consequently increasing safety.
Internal and external control models are available for accurate measurement of output torque.
Torque Range: 200N.m – 2000N.m ,
147lbf.ft – 1475lbf.ft
Square Drive: ¾” or 1”