RS PRO - Power Clamp Meter | IPM245F

Get Callback

Call

RS PRO - Power Clamp Meter | IPM245F$669

Supplier: RS Components

In Stock

Compare

Power Clamp Meter | IPM245F

RS PRO IPM245F Power Clamp Meter, 1kA dc, Max Current 1kA ac CAT III 1000 V, CAT IV 600 V

From the trusted RS PRO brand, the IPM245F Power clamp meter 1000 A AC-DC is a high performing solution for power, temperature and current measurement. It is ideal for extending the AC current measuring range of ISO-TECH and RS PRO clamp meters.

It functions as a multimeter and analyzer that can measure current and power, and has a CAT III and CAT IV safety rating.

Battery-powered for maximum portability, and with a large backlit screen, this power clamp meter is ideal for on-the-go applications in almost any environment.

It is also supplied in a carry case to keep the clampmeter safe and secure during transit.

Features and Benefits

10000 Count digital display
Active Backlit, Large-scale display
VoltSense (None Contact Voltage)
Analogue Bar graph
True RMS reading on AC and AC+DC mode
Torch lightening when clamping
Auto AC-DC 1000 Amps capability and selection
AC Current via Flexible Current Probe
Auto AC-DC 1000 V capability and selection
Auto Ohms/Continuity/Diode selection
100 K O Resistance capability
Continuity Beeper
Frequency Counter
Power and Power factor measurement
Total Harmonics distortion and Harmonics 1 to 25
Capacitance capability
°C / °F Temperature Function
Inrush Current
DCA Auto-Zeroing Key
Peak Hold
MIN/MAX HOLD
Smart Data Hold
Phase rotation indication
Low pass Filter
Auto Power Off

Applications

This multifunction clamp meter is designed for current measurement in electrical testing, and combines a digital multimeter with a clamping current sensor. The nature of the clamp means that it can fit around a wire at any point to sense current, voltage, continuity, frequency and more. This has the advantage of allowing electricians to take a reading from a wire without touching it, which is both more convenient and safer than other methods.

They are used for measuring high levels of current in service and maintenance applications. They are also used when installing electrical equipment.

Why RS PRO?

RS PRO aims to be your go-to brand when you need reliability, quality, and affordability. We source high-quality tools and parts from trusted sources and employ expert testing to build a brand you can rely on.

When it comes to test and measurement equipment, RS PRO has an extensive range of solutions. From electrical to environmental measurement, we offer calibrated and multi-function instruments to suit your needs.

Standards: IEC 61010-1: CAT IV 600 V, CAT III 1000 V

Supplied with: Clamp meter, battery (installed), carrying case, temperature Probe and instruction manual

Specifications

Attribute	Value
Absolute Maximum AC Current Measurement	1kA ac
Absolute Maximum DC Current Measurement	1kA dc
Absolute Maximum AC Voltage Measurement	1000V ac
Absolute Maximum DC Voltage Measurement	1000V dc
Absolute Maximum Resistance Measurement	100kO
Model Number	IPM245F
AC Current Measurement Resolution	100mA
DC Current Measurement Resolution	100mA
Best DC Current Accuracy	±(1.5% rdg + 5dgts)
Clamp Meter Type	Power Clamp Meter
Best AC Current Accuracy	±(1.5% rdg + 5dgts)
Best AC Voltage Accuracy	±(1% rdg + 5dgts)
Best DC Voltage Accuracy	±(0.7% rdg + 2dgts)
True RMS	Yes
Minimum Operating Temperature	0°C
Height	257mm
Functions Measured	AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode, Frequency, Harmonics, Power, Power Factor, Resistance, Temperature, Total Harmonic Distortion
AC Voltage Measurement Resolution	100mV
Maximum Conductor Size	42mm
Battery Life	100 h
DC Voltage Measurement Resolution	100mV
Power Source	Battery
Non-Contact Voltage Detector	Yes
Width	50.5mm
Length	87.5mm
Resistance Measurement Resolution	100mO
Dimensions	87.5 x 50.5 x 257mm
Best Temperature Measurement Accuracy	±1 % + 1 °C
Safety Category Level	CAT III, CAT IV
Temperature Measurement Resolution	0.1°C
Safety Category Voltage	600 V, 1000 V
Weight	470 (with Battery)g
Jaw Capacity Busbars	27mm
Maximum Operating Temperature	+50°C
Display Type	Backlit LCD
Best Resistance Measurement Accuracy	±1 % + 3 Digits
Safety Category	CAT III 1000 V, CAT IV 600 V
Absolute Maximum Temperature Measurement	+1000°C
Battery Type	9 V Alkaline (NEDA 1604 or IEC 6F22)

Need more information? Message RS Components via the form, or call and say you found them on IndustrySearch so they can best assist you.

Features and Benefits

10000 Count digital display
Active Backlit, Large-scale display
VoltSense (None Contact Voltage)
Analogue Bar graph
True RMS reading on AC and AC+DC mode
Torch lightening when clamping
Auto AC-DC 1000 Amps capability and selection
AC Current via Flexible Current Probe
Auto AC-DC 1000 V capability and selection
Auto Ohms/Continuity/Diode selection
100 K O Resistance capability
Continuity Beeper
Frequency Counter
Power and Power factor measurement
Total Harmonics distortion and Harmonics 1 to 25
Capacitance capability
°C / °F Temperature Function
Inrush Current
DCA Auto-Zeroing Key
Peak Hold
MIN/MAX HOLD
Smart Data Hold
Phase rotation indication
Low pass Filter
Auto Power Off

Applications

Why RS PRO?

Standards: IEC 61010-1: CAT IV 600 V, CAT III 1000 V

Supplied with: Clamp meter, battery (installed), carrying case, temperature Probe and instruction manual

Specifications

Attribute	Value
Absolute Maximum AC Current Measurement	1kA ac
Absolute Maximum DC Current Measurement	1kA dc
Absolute Maximum AC Voltage Measurement	1000V ac
Absolute Maximum DC Voltage Measurement	1000V dc
Absolute Maximum Resistance Measurement	100kO
Model Number	IPM245F
AC Current Measurement Resolution	100mA
DC Current Measurement Resolution	100mA
Best DC Current Accuracy	±(1.5% rdg + 5dgts)
Clamp Meter Type	Power Clamp Meter
Best AC Current Accuracy	±(1.5% rdg + 5dgts)
Best AC Voltage Accuracy	±(1% rdg + 5dgts)
Best DC Voltage Accuracy	±(0.7% rdg + 2dgts)
True RMS	Yes
Minimum Operating Temperature	0°C
Height	257mm
Functions Measured	AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode, Frequency, Harmonics, Power, Power Factor, Resistance, Temperature, Total Harmonic Distortion
AC Voltage Measurement Resolution	100mV
Maximum Conductor Size	42mm
Battery Life	100 h
DC Voltage Measurement Resolution	100mV
Power Source	Battery
Non-Contact Voltage Detector	Yes
Width	50.5mm
Length	87.5mm
Resistance Measurement Resolution	100mO
Dimensions	87.5 x 50.5 x 257mm
Best Temperature Measurement Accuracy	±1 % + 1 °C
Safety Category Level	CAT III, CAT IV
Temperature Measurement Resolution	0.1°C
Safety Category Voltage	600 V, 1000 V
Weight	470 (with Battery)g
Jaw Capacity Busbars	27mm
Maximum Operating Temperature	+50°C
Display Type	Backlit LCD
Best Resistance Measurement Accuracy	±1 % + 3 Digits
Safety Category	CAT III 1000 V, CAT IV 600 V
Absolute Maximum Temperature Measurement	+1000°C
Battery Type	9 V Alkaline (NEDA 1604 or IEC 6F22)

Read less...

Need more information? Message RS Components via the form, or call and say you found them on IndustrySearch so they can best assist you.

Datasheet(1.12MB)

Supplier

RS Components

Call 1300 656 6..

Get a Callback from an expert

Distribution: Australia & New Zealand

Location: Smithfield, NSW

Customers: Servicing Manufacturing, Infrastructure, Resources, Education, Engineering and more

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. RS Components are also proudly displaying these credentials:

Established:

1937

Employees:

200+

Customers:

Servicing Manufacturing, Infrastructure, Resources, Education, Engineering and more

Certifications:

ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007

Distribution:

Australia & New Zealand

Location:

Smithfield , NSW