All of the standard range conforms to AS/NZS standards, ASCE/SEI 48-05 and to the ENA Pole Supply and Performance Specification. The length and tip loads of the standard range make INGAL EPS steel poles a direct replacement for the most common timber and concrete poles and with significant advantages.
Lightest poles across the full range of length and tip loads
Conform to all relevant AS/NZS standards
Conform to ASCE/SEI 48-05
Conform to ENA Pole Supply and Performance Specification (separate documentation)
Non combustible with proven bush fire performance
Impervious to insects and rot
Fully recyclable with end of life salvage value
Standard poles comprise of:
12-sided pole shaft
Welded top cap
Earth point above nominal ground line
Additional in-ground corrosion protection 200mm above and 400mm below nominal ground line
Anti sink strap
Hot dip galvanised finish
Options and Accessories
Unlimited variations in the length, diameters, tip loads and hole arrangements
INGAL EPS is Australia's leading manufacturer of quality poles and columns and is the only company of its type with a presence in every Australian state and territory.
Manufacturing facilities are located locally in Brisbane, with factories in China, India and the Philippines operated by their parent company, Valmont Industries.
As a part of a large network of trained specialists, INGAL EPS offers customer solutions for any structural pole design requirement, specialising in tapered steel sections as well as pipe, rectangular hollow section, square hollow section structures.