Home Trusted by 500,000+ buyers

PR-DO-08 Digital Output Module

Supplier: Digitrack playlist_addCompare

The PR-DO-08 Digital output module is able to trigger devices based on defined events. While this must not be used as a safety device, it allows one to trigger audible and visual devices for reference.

Price Guide (Inc GST): POA

All Inputs on the PR-DI-08 module are connected to an internal 32 BIT counter, with a maximum count frequency of 50 Hz. Each of the internal counters on the module are fully re-settable from within the PRONIC20 (M/G/V) onboard web page or via AT+n commands.

All communications with the PR-DI-08 is performed using the PRONIC20 (M/G/V) Controller through the specially designed SIN digital outputs per controller. 
The PRONIC Controllers have been designed so that our customers can select the appropriate modules to suit their needs without purchasing unwanted eqipment.

Once you have selected the controller which will meet your communication needs, Digitrack are able to supply any of the following modules which can be plugged directly beside the main controller.


  • 8 digital outputs
  • Relay-isolated
  • Accept between 0 to 50 vdc
  • Data can be read/write as BYTE or BITS as output status
  • LED diagnostics
  • Module is hot pluggable

More information >>