Home Trusted by 500,000+ buyers

Pressure Cleaner | P6I-17C

Supplier: Thoroughclean

A reliable pressure cleaner for industrial use for cleaning drive ways, patios, for auto detailing, for general farm use and other tough cleaning tasks. It is compact, robust and comes with 20 meters double wire hose and an Italian-made Pressure gun with 900mm stainless steel lance.

Price Guide: POA

Quick Specs
Range: Industrial Spec
Horse Power: 6.5 HP
Motor: Petrol
Water Temp: Cold Water
Pressure: 1750 PSI
Flow: 14 LPM


  • Genuine Honda GX200 6.5 HP Class Air Cooled Petrol Engine
  • Recoil start
  • 2:1 reduction gearbox between engine and pump.
  • Ball bearing supported crankshaft
  • Overhead Valve design


  • This engine was specifically chosen for this machine due to it's reliability and performance, whether it be in the arid parts of Australia or offshore, this Honda will keep on running.
  • The gearbox reduces vibrations travelling from the engine to the pump and allows the pump to run at half of the engine speed.
  • The ball bearing supported crankshaft allows for greater stability.
  • OHV design allows for increased efficiency and optimal power transfer.


  • HAWK HC280 Triplex Pump rated at 1750 PSI max @ 14 LPM.
  • The pump is de-rated to 1600 PSI
  • Ceramic sleeved, stainless steel piston plunger rods and brass pump head.
  • Low speed pump running at 1450 RPM


  • The pump is the heart of your pressure cleaner and the most important component. HAWK pumps are the best in the high pressure industry, and are known for their exceptional quality, reliability and efficiency.
  • De-rating the pump ensures that it operates at less than its rated maximum power in order to prolong its life.
  • Low speed pumps and their seals last much longer, and are also less vulnerable to the effects of 'dry running' compared to a high speed pump.

Features & Benefits:

  • Quality black painted, fully welded, low vibration steel frame
  • Central lifting bar
  • 4 Large flat free wheels for easy rolling over rough terrain and vibration absorption
  • Thick axles (23mm) to prevent bending
  • Water supply hose is frame mounted – not mounted on the pump where you are pulling on vulnerable pump fittings while working.
  • High Pressure hose is also frame mounted – not mounted directly on the pump – so no pulling on vulnerable hose fittings when in operation.

By-Pass Valve

  • Features an Italian made K7 bypass Valve
  • Soft acting By-pass valve
  • Zero pressure stored in hose when trigger is released
  • By-pass valve is frame mounted


  • The K7 By-Pass Valve is a soft-acting which means the pressure comes on gradually – no kick-back on the gun when you pull the trigger. This makes it safe and seals last longer.
  • Zero pressure is stored in hose when the gun’s trigger is released or unit is switched off. This unique feature makes it safe and again less wear and tear on by-pass valve, hose and gun seals.
  • The By-pass valve is frame-mounted, not hanging off the pump where it amplifies vibration causing extra stress on the drive gearbox and drive shafts.

Features & Benefits:

  • A large capacity heavy duty industrial water filter
  • Stainless steel mesh that protects the pump’s ceramic pistons against water line debris and extending pump life.
  • NOT just a single water filter or strainer that blocks up easily and causes pump cavitation

Hose, Gun & Pressure Gauge
Features & Benefits:

  • 20m 3/8″ double wire R2 HP Hose rated to 5000 PSI with stainless steel fittings. (4X burst rating)
  • Hose swivel prevents kinks and hose stiffness while pressure cleaning making it operator friendly
  • Tough Italian made 4060 PSI gun with Stainless Steel lance with moulded hand grip
  • 900mm Insulated stainless steel lance
  • Stainless Steel BSP/NPT Nozzle Holder fitted to the lance with a 1/4″ stainless steel nozzle with 15 degree fan for general cleaning – correctly sized for pressure and flow
  • Stainless Steel pressure gauge – liquid filled to protect against pressure spikes


View pressure cleaner specification sheet