The nVision is not just a new data-logging calibrator. Its a field calibrator that can display data graphically on a high resolution screen.
CONTACT THIS SUPPLIER TO FIND OUT MORE
One or two modules can be fitted to the base module (upper and lower).
Combinations are pressure + temperature, pressure + pressure (for differential), pressure + mA/Volts, temperature + temperature, temperature + mA/Volts. An Absolute pressure module can be added as a third module underneath the rear battery pack.
Pressure modules from 30 PSI to 15,000 PSI
No need to stop a test to analyse data on a PC. Live data can be displayed graphically, with the ability to zoom into specific events, or zoom out to get a big picture of your test.
Up to 0.025% of reading accuracy for pressure.
nVision modules are complete and independent. Each contains dedicated signal conditioning and a microcontroller.
Modules can be removed, exchanged and even calibrated without the base module.
Fully temperature compensated from -20 to +50 Degrees C.
ATEX/IECEx intrinsically safe.
Log and display 500,000 points at up to 10 readings per second on two sensors simultaneously.
IP67 enclosure (1 metre submersible up to 30 minutes).
Uses Crystal Engineerings new leak free CPF fittings.
Interactive real-time graphing of measurements.
Discover events (spikes) or trends (leaks) in real time.
Battery powered by 4 size AA non rechargeable.
Software included to communicate, configure, data log and update.