The Protectoseal Series No. 830, Pressure / Vacuum Conservation Vent with Flame Arrester, is designed to prevent costly evaporation losses, tank burst due to over-pressure, and collapse due to vacuum.
Description
The flame arrester protects tank against fire and explosion caused by exterior sources of ignition. Pallets in the vent housing minimise air and vapour loss as the tank “breathes”. They open and close just enough to maintain safe working pressures and avoid damage to the tank. The flame arrester is mounted externally and is only exposed to vapours when venting.
Features of this product
Settings achieved by weight loading
Sizes 2?” (DN 50) through 10?” (DN 250)
Suitable for unconfined, Group D vapour deflagrations
Reduces costly evaporation losses
Single body construction with external flame arrester
Leakage rate of less than 1 SCFH of air at 90% of set point
Patented, FEP film “Air-Cushioned Seating”
Low-leak pallet design – certified test reports
Factory tested / certified for leakage and correct settings
Available in Aluminium, Ductile Iron and Stainless Steel
Need more information? Message Cebeco via the form, or call and say you found them on IndustrySearch so they can best assist you.
The flame arrester protects tank against fire and explosion caused by exterior sources of ignition. Pallets in the vent housing minimise air and vapour loss as the tank “breathes”. They open and close just enough to maintain safe working pressures and avoid damage to the tank. The flame arrester is mounted externally and is only exposed to vapours when venting.
Features of this product
Settings achieved by weight loading
Sizes 2?” (DN 50) through 10?” (DN 250)
Suitable for unconfined, Group D vapour deflagrations
Reduces costly evaporation losses
Single body construction with external flame arrester
Leakage rate of less than 1 SCFH of air at 90% of set point
Patented, FEP film “Air-Cushioned Seating”
Low-leak pallet design – certified test reports
Factory tested / certified for leakage and correct settings
Available in Aluminium, Ductile Iron and Stainless Steel