The HT Italia HT8100 is a professional TRMS DMM as well as a process calibrator generating 0-20mA and 4-20mA DC current signals. As a DMM, the instrument carries out AC/DC/AC+DC voltage measurements up to 1000V and AC/DC/AC+DC current measurements up to 1A. Under the current generation mode you can manually select between 0-20mA and 4-20mA as well as automatic ramps on output signal. It is capable of measuring the current absorbed by external transducers simulating a current adjustable within the whole measuring range. The instrument can store measurement results into an internal memory and is designed in compliance with safety standards IEC/EN61010-1 according to CAT III 1000V and CAT IV 600V with double insulation protection. Each function can be selected through corresponding keys. This instrument is typically used in the automation field.
HT Italia HT8100 Functions
DC/AC TRMS Voltage
DC/AC TRMS Current
Generation of output current signal up to 24mA DC
Selection 0-20mA and 4-20mA output
Up to 4 available automatic ramp
Loop current measurement of external transducers
250 Ohm HART feature
Simulating of external transducers
Resistance and continuity test
Frequency, Data Hold, Min/Max/AVG
Autotest for automatic detection of AC or DC parameters
OBIAT Electronics Pty Ltd | Test & Measurement Equipment
OBIAT Electronics has been established as an importer, distributor, wholesaler and retailer of quality Test and Measuring Instruments for over fifteen years.
Our competent staff collectively have over forty years of experience in electrical and electronic testing and are well qualified to offer the right advice and applications support for our customers equipment needs.
We provide service and calibration support and have a competent network of sub-distributors throughout Australia. If you have a requirement for Test and Measuring Instruments don't waste your time and money. Talk to us first and last!