Measures mA signals for PLC and control system analogue I/O
Measure 4 to 20 mA signals from transmitters without breaking the loop
Measurement spotlight illuminates the test point
Detachable clamp head with extension cable for measurements in confined spaces
4.5mm dia conductor jaw capacity
DC voltage measurement to verify 24 V power supplies or voltage I/O signals
Source dc voltage to test input devices that accept a 1 to 5 volt or 0 to 10 volt signal
Scaled mA output corresponds to the 4 to 20 mA signal measured by the mA clamp enables a logging DMM or other device to record the 4 to 20 mA signal without breaking the loop mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal
Voltage output linear ramp or 25 % step output
Automatically change the voltage output for remote testing
RS Components | Electronics, Electrical and Industrial Distributor
RS Components is Australia and New Zealand's leading electronic, electrical and industrial distributor.
Over 500,000 products including batteries, tools, cables, connectors, semiconductors, test and ...