The capacity ranges between 8-76 l/h at a max. back pressure of 10-4 bar. The output can be adjusted by a self-locking rotary knob in 1% steps via the stroke length (3 mm).
The reproducibility of the metering is better than ±2% in the stroke length range of 30% - 100% given defined conditions and correct installation. (The notes in the operating instructions must be observed.)
The rugged, corrosion-resistant metal-plastic housing has the IP rating IP65. A choice of 4 gear ratios, 2 liquid end sizes, 2 liquid end materials (PVDF; SS) allows the pump to be ideally matched to the basic metering tasks.
For safety-technical reasons, suitable overflow guards are to be installed in all motor metering pumps.