PT9000 Series Heavy Industrial Cable ...
Heavy Industrial Grade Cable-Extension Position Transducer (String Pots)
These industrial grade Cable-Extension Position Transducers range from 0-75 (190cm) to 0-550 (1397cm) inches.
Available in 9 different types:
Voltage Divider - PT9101
The PT9101 is a work-horse for demanding long-range applications requiring linear position measurements. Available with either a 500, 1K, 5K, or 10K ohm potentiometer, the PT9101 operates with any basic panel meter or programmable controller.
4 ... 20mA - PT9420
The PT9420 is a great value for demanding long-range applications requiring a 4-20mA linear position feedback signal. Sealed to meet NEMA 4 standards, this Cable-Extension Transducer will perform even under the harshest of environmental conditions.
0 ... 10 VDC - PT9510
The PT9510 can operate from an unregulated 14.5 to 40 VDC power supply while providing a regulated output signal over its full extended range. It provides a 0-5 or 0-10 VDC position feedback signal proportional to the linear movement of its stainless steel measuring cable.
Incremental Encoder - PT9150
With its incremental optical encoder and industrial design, this rugged transducer provides the highest accuracy and longest life of any measurement device of its kind. This model is available in a wide variety of resolutions and output stages to fit virtually any requirement.
It can measure up to 550" (1397cm), yet when its cable is retracted, it is only 6" (15.24cm) long. Its small size and low-cost-to-measurement ratio offers remarkable flexibility and value.
Position/Velocity - PT9301
The PT9301 is a combination position and velocity transducer for demanding long-range applications requiring linear measurements. A precision plastic-hybrid potentiometer provides accurate position feedback while a self-generating DC tachometer provides a velocity signal that is proportional to the speed of the travelling stainless-steel measuring cable.
CANBus - PT9CN
The PT9CN communicates linear position feedback via the CANbus SAEJ1939 interface. The PT9CN has been designed for factory and harsh environment applications requiring full stroke ranges up to 550" (1397cm).
DeviceNET - PT9DN
The PT9DN communicates via DeviceNET protocol with programmable controllers in factories and harsh environments requiring linear position measurements in ranges up to 550" (1397cm).
RS232 - PT9232
The PT9232 delivers position feedback via RS232 serial communication to your data acquisition or controller system. The PT5232 sends a raw 16-bit position count from 0000 to FFFF (hex). Additionally this device can be set to continuously send data or send data only when polled.
As the internal position sensing element is a precision potentiometer, this transducer maintains current accurate position even during power loss and does not need to be reset to a “home” position.
String Encoder - PT9600
The unique industrial-grade string encoder module mates to virtually any encoder, giving you a cost-effective linear position measurement solution that precisely fits your requirements.
Velocity Limiting System - VLS9000
Ranges: 0-75 (190cm), 0-1700 inches (4318cm)
The Velocity Limiting System (VLS) is an option for PT9000 Series cable extension transducers that limits cable retraction to a safe 40 to 55 inches per second for standard spring options and 40 to 80 inches per second for the higher spring tension options.
The VLS system prevents the measuring cable from ever reaching a damaging velocity during an accidental free release. This option is ideal for mobile applications that require frequent cable disconnection and reconnection. It prevents expensive unscheduled downtime due to accidental cable mishandling or attachment failure.
Redundant Brush System - RBS9000
Ranges: 0-75 (190cm), 0-1700 inches (4318cm)
Designed for extreme applications where exceptional amounts of dirt, spray or some other foreign matter may enter through the standard PT9000 'slot opening' and interfere with the cable reel mechanism.
The RBS9000 reduces the cable opening down to a single-point exit to block most debris from entering the cable-reel area. Because some debris may get drawn into the transducer by the measuring cable upon retraction, we've taken two measures to help reduce that by:
Contact Supplier for more information
|
Need more information? Message IDM Instruments via the form, or call and say you found them on IndustrySearch so they can best assist you.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product