Australia's #1 industrial directory for equipment & suppliers

QuickServers by FieldServer, Provided by ProSoft

Supplier: Prosoft Technology

QuickServer Multi-Protocol Gateways for Building Automation

CONTACT THIS SUPPLIER TO FIND OUT MORE

QuickServer, by FieldServer, is high performance, fully configurable, cost effective Building and Industrial Automation gateway for integrators to easily interface devices to networks in commercial buildings and industrial plants.

System integrators world-wide have benefited from the value of the powerful line of interoperability gateways offered by FieldServer. Now, QuickServer adds to that value by running the same robust FieldServer protocol conversion software on a highly cost effective platform backed by the experience, engineering expertise and proven technical support that integrators have come to expect from ProSoft Technology.

The user can preselect two Building Automation System (BAS) drivers (serial, Ethernet and/or LonWorks) to be loaded on the QuickServer at no extra charge. Additional drivers are available at extra cost. Common combinations of drivers include Modbus RTU, Modbus TCP, BACnet/IP, BACnet MS/TP, LonWorks, JCI Metasys N2 and SNMP.  QuickServer is ready to configure for the specific application. All necessary instructions and software are included with QuickServer. If the user prefers the unit to be pre-configured prior to delivery, FieldServer offers a custom configuration service.

QuickServer Key Features:

  • Ability to interface up to 250 or 500 points of common BAAS protocols depending on gateway
  • Multi-configuration capability; specific configurations selectable via DIP switches or software
  • DIN rail mount included with gateway
  • DIP Switches to select baud rate or node ID in the fly
  • BACnet COV support for fast data communication while reducing the traffic over a BACnet network. BTL Marked (PS-QS-1X10-XXXX and LonMark Certified (PS-QS-1X11-XXXX)

Part Numbers for Ordering:
QuickServer PS-QS-1X1X is available in multiple default driver configurations. Other driver configurations are also available. The most common drivers for building automation systems are Modbus RTU, Modbus TCP, BACnet MS/TP, JCI Metasys N2, LonWorks and SNMP. QuickServers utilizing these drivers include:

250 Point
PS-QS-1010-0780 Ethernet to BACnet MS/TP or BACnet/IP, 250 Point
PS-QS-1010-0781 DF1 to BACnet MS/TP or BACnet/IP, 250 Point
PS-QS-1010-0757 Modbus RTU or Modbus TCP/IP to BACnet MS/TP or BACnet/IP, 250 Point
PS-QS-1010-0782 EtherNet/IP or DF1 to Metasys N2, 250 Point
PS-QS-1010-0117 Modbus RTU or Modbus TCP/IP to Metasys N2, 250 Point
PS-QS-1011-0783 EtherNet/IP or DF1 to LonWorks, 250 point
PS-QS-1011-0154 Modbus RTU or Modbus TCP/IP to LonWorks, 250 Point
PS-8790-33 Configuration service for 250 Point gateway

500 Point
PS-QS-1510-0780 Ethernet to BACnet MS/TP or BACnet/IP, 500 Point
PS-QS-1510-0781 DF1 to BACnet MS/TP or BACnet/IP, 500 Point
PS-QS-1510-0757 Modbus RTU or Modbus TCP/IP to BACnet MS/TP or BACnet/IP, 500 Point
PS-QS-1510-0782 EtherNet/IP or DF1 to Metasys N2, 500 Point
PS-QS-1510-0117 Modbus RTU or Modbus TCP/IP to Metasys N2, 500 Point
PS-QS-1511-0783 EtherNet/IP or DF1 to LonWorks, 500 point
PS-QS-1511-0154 Modbus RTU or Modbus TCP/IP to LonWorks, 500 Point
PS-8790-03 Configuration service for 500 Point gateway and SlotServer

Specifications

Field Connections
PS-QS-1X10-XXXX

  • Ethernet 10/100 RJ45
  • Two Serial RS-485 terminal (up to 115K baud)

PS-QS-1X11-XXXX

  • Ethernet 10/100 RJ45
  • Serial RS-485 terminal (up to 115K baud)
  • FTT-10 LonWorks port

Environment

  • Operating temperature: -40°F to 167°F (-40°C to 75°C)
  • Relative humidity: 5% to 90% RH, with no condensation

Power Requirements

  • 9 to 30 Vdc or Vac or 5 Vdc
  • Current draw @ 12V
  • PS-QS-BAS-1X10: 150 mA
  • PS-QS-BAS-1X11: 279 mA

Other

  • Configuration/Diagnostic utilities
  • Capacity: 250 or 500 point (depending on gateway)
  • Table, Wall or DIN rail mount

Physical Dimensions (WxDxH)

  • 4.5 x 3.2 x 1.6 in. (11.5 x 8.3 x 4.1 cm)
  • 0.4 lbs (0.2 Kg)

Approvals

  • TUV approved to UL 916 standard
  • CE Mark
  • BTL Mark (PS-QS-1X10)
  • LonMark Certified (PS-QS-1X11)
  • RoHS Compliant
  • FCC Part 15 Compliant

LonMark Certification on the QuickServer PS-QS-1X11-XXX

  • SPID: 80:00:95:46:00:84:04:01
  • Profiles:
    • 0000 - Node object (1)
    • 0001 - Open Loop Sensor Oject (5)
    • 0003 - Open Loop Actuator Object (5)

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more