The Radiodetection CAT4+ underground cable avoidance tool/underground service locator delivers highly refined locate capabilities, specifically designed to help the operator find more buried utilities.
Avoidance Mode - for rapid scanning and locating, simultaneously searching for power, radio and Genny signals all at the same time.
Genny Mode - Detects the signals transmitted by the Genny4, with on demand estimation of the depth of buried services (direct coupling and inductive mode)
Power Mode - Detects the electromagnetic fields generated by live cables
Radio Mode - Detects long range radio signals as they travel along buried cables or pipes
Small Cable Locate - Dual-frequency locate. Simultaneous dual frequency and simple locating methods assist CAT4 and Genny4 users to locate Small Diameter cable such as telecom twisted pairs, CATV feeds, spurs and drop-offs which have historically been hard to find and are a common strike risk
Dynamic Overload Protection; Radiodetection’s unique digital signal processing capabilities equips the C.A.T4 with the ability to reject electrical interference. Dynamic Overload Protection gives CAT4 series products the ability to continue operating in electrically challenging areas, such as near substations and under power cables, where other locators’ detection circuitry may be overloaded and no longer function.
Avoidance Mode . Sweep an area using Power, Radio and Genny signals simultaneously, saving time. CAT4 lets operators control the sensitivity of each mode/signal, enabling buried utilities to be pinpointed in a single pass, while Real Sound provides audio feedback derived directly from the utility located, easing identification to maximise speed whilst maintaining safety.
Genny4 Signal Boost. The Genny4 offers, alongside its standard power mode, a Signal Boost feature which increases the output signal by up to 10 times allowing you to locate over extra distance and depth.
High Visibility Display with Backlight. The CAT4’s high visibility display helps to minimise the possibility of misreading critical information from the unit. The high contrast and automatic backlight illumination provide optimum visibility in all light conditions.
Easy and Low Cost Remote Calibration. Using the eCert™ technology, the CAT4 underground cable and pipe locator can be easily calibrated at a fraction the cost of other locators without even sending it to a service facility. Using an internet connection, the eCert™ will provide an assessment of the unit's hardware and software using a link via a PC, and can be used to extend the validity of the calibration certificate on demand, with no downtime. The user can print or save a calibration certificate for their locator. A complete service backup is also provided here.
Straightforward Operation. The CAT4 is a simple to use underground cable and services locator with features designed to make the operator's job as easy as possible. All CAT4's are reverse compatible with Genny3 accessories.
The CAT4+ Avoidance Mode™ lets the operator check an intended excavation area for Power, Radio and Genny signals, and pinpoint located utilities in a single scan.
Test Equipment | Electrical, HVAC and Industrial Test Equipment
Test Equipment specialises in sales, service and calibration of test and measurement equipment and instruments from our facility, located in Brisbane. From here, we are ideally positioned to offer a ...