PC1000 Rail Hardened Controllers
The 28 digital outputs are designed for the toughest installations. Each are 35V Low-Side N-Channel MOSFET drivers and can sink 1A at 24VDC over the temperature range -40ºC to +70ºC.
Analogues are not forgotten on this controller with 10 inputs available on board, each channel can be individually configurable as 0 to +10 VDC, 0 – 20mA or NTC Thermistor (optimised for 2K ohm resistance at 25ºC ambient). Outputs have a resolution of 10-bits and each channel can individually be configured as0 0 to +10 VDC or 0 – 20mA.
OEM Technology Solutions ProTeso PC1 range of programmable controllers have been designed and manufactured to meet the most demanding automation and control applications and are designed to comply with EN50155.
The ProTeso PC1 controllers are low profile and are housed in rugged enclosures. Each comes with adequate mounting points and optional DIN mounting clips.
All controllers are equipped with an Ethernet port for connection to the Local Area Network. Control and monitoring data maybe passed between controllers or onto the CiTeso SCADA/BMS/HMI Software.
The controllers have been designed to operate on a wide range of supply voltage and in demanding environmental conditions, making them ideal for a broad range of applications.
The I/O on each controller may be extended by connecting addition ioTeso I/O Expansion Modules to the RS485 port. I/O Expansion Modules are available in a range of configurations including analogue and digital inputs and outputs.
The internationally recognized IEC61131-3 programming system makes configuring and programming the controllers simple. The use of graphical languages ensures that long term maintenance is not an issue.
Other products in the range include:
PC1100 Programmable Controller
The PC1100 Programmable Controller provides flexibility by incorporating universal inputs that can be analogue or digital. Added to the existing I/O configuration this added flexibility ensures that the PC1100 fits the application exactly.
By combining the existing 6 analogue inputs with the 3 universal inputs a total of 9 analogue inputs may be achieved. The analogues have the same specification as the PC1000.
The PC1100 is also configured with 16 digital inputs and 18 digital outputs all with the same specification as the PC1000 Programmable Controller.
PC1200 Programmable Controller
The PC1200 Programmable Controller provides less I/O but maintains the flexibility by incorporating universal inputs that can be analogue or digital.
By combining the existing 5 analogue inputs with the 4 universal inputs a total of 9 analogue inputs may be achieved. The analogues have the same specification as the PC1000 and PC1100.
The PC1200 is also configured with 8 digital inputs and 12 digital outputs all with the same specification as the PC1000 and PC1100 Programmable Controllers.
PC1300 Programmable Controller
The PC1300 Programmable Controller is perfect for applications with lots of communications requirements. The PC1300 comes with 5 serial ports configured as 4 x RS232 and 1 x RS485. It also incorporates Ethernet 10/100Base-T.
Four (4) relay outputs with both normally open and normally closed contacts provide flexibility and isolation. These are matched with 4 x digital inputs and 4 x analogue inputs. The PC1300 also includes an 8-bit LCD bus to connect directly to low cost LCDs.
PC1400 Programmable Controller
The PC1400 Programmable Controller provides and assortment of I/O interfaces for those difficult applications where equipment interfaces are not always straight forward. High and low side digital inputs, relay and transitor driver outputs, differential and single ended analogue inputs. The PC1400 comes with four serial ports and 1 x Ethernet 10/100Base-T.
Using the two quadrature inputs of the PC1400, the controller is able to calculate both position and direction of rotation.
IoTeso I/O Expansion Modules
The IoTeso I/O Expansion Modules are a flexible way to increase the I/O density of the ProTeso range of Programmable Controllers. The I/O expansion modules offer a range of alternate types and configurations such as analogue 0-10V, 4-20ma, optical inputs and relay outputs.
The IoTeso I/O Expansion Modules connect to the programmable controller via the multidrop RS485 network. Each module has a unique identifier to permit as many as 32 I/O modules to reside on the one RS485 expansion network.