RMS-300 Is a unique remote monitoring, data acquisition, and control device specifically designed for use with Battery powered wireless internet repeater sites, or other AC & DC powered remote equipment.
Use RMS-300 to monitor battery levels, room temperature, signal strength (RSSI) on radios and more. RMS-300 has 6 onboard isolated voltmeters giving it the ability to measure DC voltage from -100 to +100 volts with 24 bit accuracy. RMS-300 also has 3 power relays giving it the unique ability to turn on/off devices remotely using an Internet connection. Use the power relays to remote start a generator. RMS-300 has 5 dedicated input pins used for door alarms or to monitor motion sensors. RMS-300 has a full featured serial port, control modems, cell phones, gsm modules, and other devices that use serial communication.
Four layer PCB with Nickel Immersion Gold plating and red solder mask
400 - MHz Arm Processor (500 Mips !)
256 - megs of Nand Flash. Create and store custom applications
64 - megs of SD-Ram
Low Noise Switching Power Supplies accepts 8 - 60 vdc input. Can be powered directly from 12, 24, or 48 volt battery banks
Battery backed-up, real time clock
One onboard temperature sensor –25c +100c
Eight 24 bit isolated voltmeters (+/- 100 VDC). Each voltmeter has its own 24 bit Delta Sigma ADC
Four Latching Relays for devices using 1 – 240v - 16 amps AC/DC current
Three programmable push buttons
Six general purpose I/O pins
Power output port, 5.0vdc (500ma)
Power output port, 3.3vdc (500ma)
One full serial port for controlling cell phones, modems, etc
One console serial port
1-Wire interface for external temperature sensors
Two USB 2.0 ports for cameras, wireless clients, extra Ethernet, etc
Ping watchdog, power cycle equipment after a set amount of ping timeouts
Command line utilities: ping, ftp, email, relays, etc
Flash new firmware over the internet
Duel Watchdog Reset circuits, processor integrated, and extra hardware
Control RMS-300 via web page, telnet, ssh, or snmp
Full SNMP v1, v2, v3 support (default v3).
For a free quote just submit the 'Enquire Now' form or call us.
Helios Power Solutions Pty Ltd | Power Supplies, Batt Charger, DC/DC & LED Driver IndustrySearch Trusted Supplier
Power supplies for industrial, mining, railway, Land & Mobile Radio, lighting (LED), medical power supplies and laboratory power supplies are a major specialty of Helios Power Solutions.
We also manufacture and supply AC/DC Power Solutions DC/DC Converters, Battery Chargers, DC/AC Inverters and many DC power-related products...that are available open frame, chassis mount, Din rail mount, 19" rack mounting, pcb mount and external/desktop type.
An Australian owned company with over 30 years in the power supply industry...Our Aim is to:
Become and remain the supplier of choice of Power Supplies for our customers.
Provide customers with the most cost effective power supply solution for their application.
Hold sufficient inventory that provides customers with short delivery times.
And to provide professional technical advice -- at all times.
The ability to provide custom design power supply solutions in low volume, is one of Amtex's strength.
Our Service and Repair department is staffed by qualified Technicians to provide after sales service of our products.
Our industry knowledge and DC Power Supply range is what customers have come to appreciate and finding the right power supply solution is made simple by our user friendly website.