Non-directional (isotropic) measurements with three-channel sensor.
High dynamic range. (due to 3-channel digital result processing).
Configurable Alarm Threshold and Memory function.
Low battery indication.
Auto Power Off (adjustable from 0 to 99 minutes) with disable function.
HF electromagnetic wave field strength measurements.
Mobile phone base station antenna radiation power density measurement.
Wireless communication applications (CW, TDMA, GSM, DECT).
RF power measurements (Transmitters).
Wireless LAN (Wi-Fi) detection, and installation.
Spy camera, wireless bug finder.
Cellular/Cordless phone radiation safety levels.
Microwave oven leakage.
EMF safety (environmental applications
4-1/2 digit LCD, maximum reading 19999
One continuous range
0.1mV/m, 0.1µA/m, 0.001µW/m2, 0.001µW/cm2
typical 1.5s (0% to 90% of measurement value)
1.5 times per second
mV/m, V/m, µA/m, mA/m, µW/m2, mW/m2, µW/cm2
Instantaneous measured value, Max value, Avg value, or Max Avg value
Adjustable threshold with ON/OFF
Calibration Factor (CAL)
Manual Data Memory & Read
Storage: 200 data sets
0°C to 50°C; Humidity 25% to 75% R.H.
-10°C to 60°C; Humidity 0% to 80% R.H.
9 Volt Alkaline battery. NEDA 1604, IEC 6F22, or JIS 006P
approx. 15 hours
Auto Power Off
Default time 15 minutes. Adjustable threshold 0 to 99 minutes
195mm (L) x 60mm (W) x 60mm (D)
approx. 200g (including battery)
Special Promotion on this product is available.
Mention IndustrySearch and get 10% off
For more information or a quote please call or use the email for a direct reply.
OBIAT Electronics Pty Ltd | Test & Measurement Equipment
OBIAT Electronics has been established as an importer, distributor, wholesaler and retailer of quality Test and Measuring Instruments for over fifteen years.
Our competent staff collectively have over forty years of experience in electrical and electronic testing and are well qualified to offer the right advice and applications support for our customers equipment needs.
We provide service and calibration support and have a competent network of sub-distributors throughout Australia. If you have a requirement for Test and Measuring Instruments don't waste your time and money. Talk to us first and last!