Algodue - Rogowski Coils Current Transducer | MFC150

MFC150 is a flexible current transducer based on Rogowski principle, particularly suitable for measurement in combination with portable devices. MFC150 coils are available in different sizes and can be supplied according to customer’s design, therefore they can be used in all those applications, in which traditional transducers are not fitting due to its size and/or weight.

Due to its specific features, flexible Rogowski coil is an extremely confortable solution for current measurement and can be used in a number of cases where traditional current transducer is not the adequate solution.

MFC150 coil is provided with a shield against the influence of external magnetic fields, therefore it grants a stable measurement from low currents to hundreds of kA. The Rogowski coils must be connected to an electronic integrator for 90° phase shift compensation and frequency equalization. Our portable and panel meters can interface Rogowski coils directly without the need of the external integrators. This is an advantage because there is no external boxes or any power supply with consequent ease of use. The particular features of the Rogowski coils combined with the extremely flexible input programming of our portable meters, allow to carry out measurement by all applications.

Key Features:

• Suitable to measure currents from mA to hundreds of kA
• High Linearity
• Wide dynamic range
• Very useful with large size or awkward shaped conductors or in places with limited access
• No danger from open-circuited secondary
• not damaged by overloads
• Non-intrusive, no power drawn from the main
• Thanks to its light weight, it can be changed on the measured conductor
• Totally shielded
• UL file n. E231725-A1-UL