Metal Ready is specifically developed to work in partnership with POR-15 and gives your metal surface ideal surface adhesion.
Metal Ready is specifically developed to work in partnership with paint and gives your metal surface ideal surface adhesion for Bill Hirsch Paints.
Do not use other metal prep products since many of them contain harmful residues which prevent the proper adhesion of paint.
Metal Ready creates the ideal anchor pattern for paint adhesion and is safe and easy to work with.
After thoroughly degreasing your surface apply Metal Ready to both neutralise and remove rust.
Surface rust removes in minutes. Allow up to half an hour and repeat if necessary.
Do not leave it on for long periods. Rinse off with water and allow to completely dry.
After drying it will give a salt and pepper look. This is normal with the Zinc Phosphate adhering to the metal.
It's not necessary to use if the item has been sand blasted.
Metal Ready also etches new clean bare metal (new metal always has an oil based preservative on it) and allows for better adhesion.
It is not caustic, toxic or flammable. If used in marine application we suggest that you contact us.
Available in 250ml, 500ml, 1 Litre, 4 Litres
To learn more about Metal Ready Rust Remover and Pre-primer please call or email for a direct reply.
Bilt Hamber Deox C Concentrated Rust Remover
Rust Removal | Deox-Gel Bilt Hamber
Condensate Trap | Rust Handler®
Eastwood Rust Encapsulator Platinum
Rust Protection - Corrosion Control
Rust Paint & Protection | Rusttech™
Rust Inhibitor - FORCEFIELD
Seal Remover Tool (1200657)
Spotcheck Solvent Cleaner/Remover
Scratch Remover | Xerapol®
NEW Ajax Coolant Tank Chip & Sludge Remover
How to stop / prevent rust
Self primer ideal for seawater at Daydream Island
PPC ID Card Solutions - Corporate Case Study
PPC Photo I.D. cards improves Tennant Creek Hospital security
Moving pre-fabricated timber trusses
Benefits of Pre-Applying Sealant Coatings to Fastners
Metal Detection / Testing Procedures
Difficult metal detection applications
New alternative to traditional pre-stretched and conventional films
Metal and material cutting capabilities