Australia's #1 industrial directory for equipment & suppliers

Safety & Goods Cages for Cranes | WP-C

Supplier: R.J. Cox Engineering

WP-C Crane Cage Work Platform has been designed strictly in accordance with Australian Standard AS 1418.17 and is suitable for a maximum of two people

CONTACT THIS SUPPLIER TO FIND OUT MORE

WP-C Crane Cage Work Platform (Pictured Left)

  • Work performed in this Cage shall be limited to special tasks of short duration in situations where necessary to elevate personnel where it is not practicable to erect scaffolds or use a specially designed device.
  • Fork Arm slippers are provided for transport purposes only.
  • Standard finish on the Cage is painted enamel in ‘Safety Yellow’
  • All Crane Cages are supplied with a Load Test Certificate, Instructions for usage, Risk Control Measures and Workcover registration.
  • Suitable for 2 people
  • Safe Working Load (SWL) 250kg
  • Unit Weight 160kg
  • Pocket Size 165 x 65mm
  • Pocket Centres 775mm
  • Supplied with Lifting Chains
  • Current Pricing on WP-C Crane Cage Work Platform

CSP4 Crane Goods Cage (Pictured Right)  is designed to convey loose or palleted goods using either a Forklift or Crane.

  • Full width gate allows 1200mm square pallets to be placed inside the Cage if required.
  • Standard Cage is 1375mm square overall and 1200mm high with a gate opening of 1275mm.
  • Crane Lug Stacking corners allow the Cage to be stacked on top of each other – 3 high when empty, 2 high when full.
  • The standard finish of the Cage is enamel painted over primed steel in “Safety Yellow”.
  • 4 point lift
  • Lift capacity 1000kg
  • Unit Weight 160kg
  • Also available with Sheet Metal sides
  • Pricing on Goods Cage for Cranes

New Item Not Pictured

BSN6 Brick Transport Cage Overhead Crane Lifting AttachmentsBrick Transport Cage
Designed to convey pallets of Bricks or similar products safely to work locations via overhead Crane. Suitable for 1200mm square pallets (1240mm clear inside), and up to 1500mm overall height.

  • Supplied standard as a "Flatpack" (1750 x 1370 x 475mm), or may be fully assembled upon request.
  • This unit is supplied fully assembled with all side and roof panels additionally welded in place to make the unit a permanent structure.
  • 4 Point Lift
  • Lift Capacity 2000kg
  • Unit Weight 255kg
  • Up to 1500mm High Pallets
  • Tine Storage when not Hoisting
  • Zinc Plated Finish
  • Chains not included.
  • Further Information and Pricing

Gas Cylinder Crane Cage GCN-2Gas Cylinder Crane Cage GCN-2

  • GCN-2 Gas Cylinder Crane Cage has been designed to suit one type Oxygen and one type Acetylene gas cylinder.
  • Provision has been made to store all hoses inside the cage.
  • Cage is supplied with an internal loadbinder to securely fasten both cylinders.
  • Fitted with Handle and 400mm air inflated rubber wheels, this cage can be transported
    manually or by Crane.
  • Single point lift
  • Safe Working Load (SWL) 250kg
  • Unit Weight 80kg
  • Painted Enamel Chassis/Rims
  • All other components Zinc Plated

Overall Size 914 x 672 x 1370mm

WP-C Crane Cages

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more