- Profile 8
- Profile 6
- Profile 5
- Curved and Angled Profile
- Cover Profiles
- Right Angle Fasteners
- Angle Fasteners
- Handles, Door Catches and Hanger
- Sliding Door System
- Panel Fasteners
- Adjustable Feet
- End Caps and Drill Hole Covers
Customised to meet essentially any required dimensions, the modular building kit will optimise space and cater precisely to special purpose designs.
The frame structures are built using aluminium profiles and a range of fasteners which are able to withstand applied forces.
The Aluminium Profiles are cut to size, with no minimum length and a maximum length of 6m for most profiles. As well as the standard profiles 5, 6 and 8, there is a broad range of curved and angled profiles.
Cover profiles are available to cover up the groove for a neat finish.
Powder coating the frame in a different colour can also be provided.
A number of options are available for fastening the frame. Most needing little, if any, machining.
While right-angle fasteners are the most broadly used, angle fasteners are also available for bracing or special applications.
A range of hinges allows for the right choice based on load-capacity, safety requirements and aesthetics.
Door accessories, such as handles and door catches are readily available.
A particular feature is the Hanger, whereby doors can be lifted on and off the frame when required, safety requirements have been taken into consideration.
The aluminium frames are fitted with panels or mesh in order to provide passive protection.
Panels can simply be placed inside the groove, or fastened outside the groove if required. The range of panel fasteners can accomodate retrofitting panels in existing structures.
The panel elements making up the machine frame can take the form of swing or sliding doors as well as incorporating electrical security if required.
Mesh and polycarbonate panel options are available, in clear, opaque or coloured.
Stable, adjustable feet provide a safe and reliable support, capable of accommodating the loads which arise and also provide a means of compensating uneven floors.
End caps are readily available for the end face of the profiles. As well as covers for the drill holes of closed groove profiles, if required.