SSEA Safety Nets are used for catching items falling from racking, conveyors, construction sites, bridges, dam walls, confining freight to within loaded trucks and utes or trailers etc.
In the case of PFS nets there is no Australian Standard at present so the manufacturers of Specialised Safety Equipment Australia's nets use the guidelines from the 'BS EN 1263-1' standard. This standard is basically the same as the US and Japanese standards for PFS nets and is very broad in its specification, but is very particular in the test that the nets have to withstand to comply and the perimeter restraint requirements of a fixing point every 2500mm maximum.
Specialised Safety Equipment Australia | Load Containment Safety Nets
Specialised Safety Equipment Australia's management has many years of experience in industries that require special emphasis to be placed upon safety. This experience has been gained in the building and construction, transport and training industries and the experience has been hands on as well as in management. In gaining this experience we have developed relationships in many fields which has allowed us to develop our products to be the best on the market.
These relationships include people in the regulatory bodies that overlook industry, as well as the manufacturers and end users of safety equipment. Safety nets are required for a multitude of purposes as well as for personnel fall safety (PFS).
Catching items falling from racking, conveyors, construction sites, bridges, dam walls, confining freight to within loaded trucks, utes or trailers etc are some of the uses to which nets are put. At Specialised Safety Equipment Australia our nets are based on the guidelines from the 'BS EN 1263-1' standard. This is an International standard which no other company in Australia has met.