Machine safety design is a detailed topic addressed by many regulations and standards, and it is also supported by numerous specialty products and practices.
However, this doesn’t ensure appropriate machine safety measures are always applied. There is a strong tendency among many designers to presume that machinery must come to a full stop when errors are detected. This belief, along with overly conservative interpretations of ISO standards, has led many designers to handle most situations as category 3 or 4, requiring full redundancy. In 2015, ISO 13849 was revised and the requirements for category 2 were updated becoming easier for users incorporate into their machine safety systems.
Instead of mandating full redundancy as with categories 3 or 4, when category 2 is acceptable, only single input connections, less expensive controllers, and single outputs can be used. Design effort is reduced, the safety controllers relay modules are more economical, fewer and less-specialized non-redundant devices can be used, control panel space is saved, and field installation labor is reduced.
The first category 2safety relay module in the industry
Ideal for low-risk machines
Safety with non-redundant safety circuit.
Push-in terminals save installation labor and prevent loosening of wires
Slim body save control panel space
IDEC | Control Automation Products
We design and build products that make the interactions between people and machines safer, more efficient, and more productive. Our history of obsessing over the details stretches back to our founding ...