Sanicubic Pro is a heavy duty pump, designed for discharge of waste from multiple WC's and other waste water producing appliances. It has the ability to pump waste away through 40mm (50mm OD) pipe-work.
Sanicubic Pro pumps up to 11m vertically to 100m horizontally or a lesser combination of vertical and horizontal. It can handle waste water of up to 70 degrees Celsius, and it has dual motors for absolute reliability and power.
It also has two alarms - one on the unit, and the other in a selected location - linked by radio frequency.
Recommended waste pipe diameter
40mm PVC or 50mm CU
Features of Saniflo Macerator | Sanicubic Pro
Motor RPM 2800
Electrical Supply 220-240
Watts (Consumption) 2 x 1500
Vertical Discharge 11
Horizontal Discharge 100
Gravity fall on horizontal installations 3
Working Temperature 35
Maximum Temperature 70
Dimensions (measured from floor level) 557 x 491 x 408
Saniflo Australia | Grey Water Reuse | Pumping Systems
Invented in 1958 by the multinational group, Société Française d'Assainissement, based in Paris, Saniflo pumps have quickly become generic for small-bore macerator pumping systems. These products facilitate the addition of extra sanitary, utility and kitchen facilities virtually anywhere in a building, even remote from the mains drainage or below sewer level.
The Saniflo range of macerator pumps has expanded to cover most application requirements - from an extra WC up to a complete ensuite, or provision of kitchen or utility facilities even in a basement. The current ten product models in the Saniflo range consist of Sanishower , Sanivite , Sanipro , Saniplus , Sanitop , Sanipack , Sanibest. New models ( Sanispeed , Sanicompact, Sanicubic, Sanicom and Sanicondens) were released in August 2004 to address the requirements of the commercial sector. We also have specialised units for marine use. Testing on the Saniflo ranges has been carried out by NATO, the Atomic Energy Authorities, the Oceanographic Institute, Antarctic Research Station, Military Camps, various constructions sites, as well as for the provision of facilities for the elderly, disabled and persons convalescing.
Furthermore, Saniflo products are generally submitted for testing and approval by SAI-Global (previously Standards Australia), under MP52 Spec 101, 2002 (Certificate No: PST20041) as being fit for purpose. This independent third party endorsement of our products confirms our commitment to quality of product and service as evidenced by our full guarantee, supporting technical support and nationwide network of service engineers. Our Pursuit of service excellence to our customers is ongoing and supported by our manufacturing facility having full ISO 9001:2001 Quality Assurance accreditation.