Saniplus enables you to add a bathroom or an en-suite shower room with ease.
With two extra waste water inlets, Saniplus will take the waste from a WC, a bath, wash-basin and a shower and pump waste and water away through 20mm-25mm small-bore pipe work, vertically up to 5 metres or horizontally up to 100 metres or a lesser combination of both.
Saniplus deals with the waste from a complete bathroom with ease.
Waste from the loo is dealt with first when the loo is flushed.
Waste water can be drained by gravity from the shower, bath, bidet or wash-basin to the Saniplus through inlets on either side of the unit.
Ideal for a bathroom for the disabled or infirm and you have both the choice of sanitary ware and location.
Recommended waste pipe diameter
20mm PVC or 20-25mm CU
Features of Saniflo Macerator | Saniplus
Motor RPM 2800
Electrical Supply 220 - 240 / 50
Vertical Discharge 5
Horizontal Discharge 100
Gravity fall on horizontal installations 3
Working Temperature 35
Power Consumption 400
Dimensions (measured from floor level) 512 x 181 x 270
Saniflo Australia | Grey Water Reuse | Pumping Systems
Invented in 1958 by the multinational group, Société Française d'Assainissement, based in Paris, Saniflo pumps have quickly become generic for small-bore macerator pumping systems. These products facilitate the addition of extra sanitary, utility and kitchen facilities virtually anywhere in a building, even remote from the mains drainage or below sewer level.
The Saniflo range of macerator pumps has expanded to cover most application requirements - from an extra WC up to a complete ensuite, or provision of kitchen or utility facilities even in a basement. The current ten product models in the Saniflo range consist of Sanishower , Sanivite , Sanipro , Saniplus , Sanitop , Sanipack , Sanibest. New models ( Sanispeed , Sanicompact, Sanicubic, Sanicom and Sanicondens) were released in August 2004 to address the requirements of the commercial sector. We also have specialised units for marine use. Testing on the Saniflo ranges has been carried out by NATO, the Atomic Energy Authorities, the Oceanographic Institute, Antarctic Research Station, Military Camps, various constructions sites, as well as for the provision of facilities for the elderly, disabled and persons convalescing.
Furthermore, Saniflo products are generally submitted for testing and approval by SAI-Global (previously Standards Australia), under MP52 Spec 101, 2002 (Certificate No: PST20041) as being fit for purpose. This independent third party endorsement of our products confirms our commitment to quality of product and service as evidenced by our full guarantee, supporting technical support and nationwide network of service engineers. Our Pursuit of service excellence to our customers is ongoing and supported by our manufacturing facility having full ISO 9001:2001 Quality Assurance accreditation.