Saniflo Macerator, Sanispeed, the perfect quiet solution to install a complete kitchen at ground level or in the basement. Ideal for adding additional fixtures in multiple tenancies without disturbing neighbours.
The small bore grey water pump system that's suited for commercial facilities. Sanispeed is ideal for serveries, bars, canteens and coffee stations. Its commercially rated motor pumps up to 7 metres vertically or 70 metres horizontally, or a lesser combination of both.
Commercially rated motor able to accept temperatures up to 90 degrees Celsius for 2 minutes.
Recommended waste pipe diameter
25mm PVC or 32mm CU
Features of Saniflo Macerator | Sanispeed
Motor RPM 2800
Electrical Supply 220 - 240 / 50
Watts (Consumption) 400
Vertical Discharge 7
Horizontal Discharge 70
Gravity fall on horizontal installations 3
Working Temperature 35
Maximum Temperature 75
Dimensions (measured from floor level) 373 x 185 x 275
Saniflo Australia | Grey Water Reuse | Pumping Systems
Invented in 1958 by the multinational group, Société Française d'Assainissement, based in Paris, Saniflo pumps have quickly become generic for small-bore macerator pumping systems. These products facilitate the addition of extra sanitary, utility and kitchen facilities virtually anywhere in a building, even remote from the mains drainage or below sewer level.
The Saniflo range of macerator pumps has expanded to cover most application requirements - from an extra WC up to a complete ensuite, or provision of kitchen or utility facilities even in a basement. The current ten product models in the Saniflo range consist of Sanishower , Sanivite , Sanipro , Saniplus , Sanitop , Sanipack , Sanibest. New models ( Sanispeed , Sanicompact, Sanicubic, Sanicom and Sanicondens) were released in August 2004 to address the requirements of the commercial sector. We also have specialised units for marine use. Testing on the Saniflo ranges has been carried out by NATO, the Atomic Energy Authorities, the Oceanographic Institute, Antarctic Research Station, Military Camps, various constructions sites, as well as for the provision of facilities for the elderly, disabled and persons convalescing.
Furthermore, Saniflo products are generally submitted for testing and approval by SAI-Global (previously Standards Australia), under MP52 Spec 101, 2002 (Certificate No: PST20041) as being fit for purpose. This independent third party endorsement of our products confirms our commitment to quality of product and service as evidenced by our full guarantee, supporting technical support and nationwide network of service engineers. Our Pursuit of service excellence to our customers is ongoing and supported by our manufacturing facility having full ISO 9001:2001 Quality Assurance accreditation.