Sanivite is specially designed to deal with the hot soapy pumped waste water from domestic dishwasher or washing machine, making the addition of a domestic kitchen or laundry easy, even when below or distant from a drain.
It pumps waste through a small 25mm pipe - within wall cavities or across ceilings such that there is little structural impact - and connects to the closest waste point inside the building
Sanivite is a powerful pump with four inlets for connection to sink or appliances.
Waste water is pumped through small-bore 25mm pressure PVC pipe work or 32mm copper, vertically up to 5 metres or horizontally up to 50 metres, or a lesser combination of both.
No need to cut up concrete or use large pipe diameters- just pump to the closest waste point.
The compact Sanivite is usually concealed in a kitchen unit but can also be concealed behind a demountable panel to give access if required.
Recommended waste pipe diameter
25mm PVC or 32mm CU
Features of Saniflo Macerator | Sanivite
Motor RPM 2800
Electrical Supply 220-240 / 50
Watts (Consumption) 250
Vertical Discharge 4
Horizontal Discharge 40
Gravity fall on horizontal installations 3
Working Temperature 35
Dimensions (measured from floor level) 296 x 165 x 145
Saniflo Australia | Grey Water Reuse | Pumping Systems
Invented in 1958 by the multinational group, Société Française d'Assainissement, based in Paris, Saniflo pumps have quickly become generic for small-bore macerator pumping systems. These products facilitate the addition of extra sanitary, utility and kitchen facilities virtually anywhere in a building, even remote from the mains drainage or below sewer level.
The Saniflo range of macerator pumps has expanded to cover most application requirements - from an extra WC up to a complete ensuite, or provision of kitchen or utility facilities even in a basement. The current ten product models in the Saniflo range consist of Sanishower , Sanivite , Sanipro , Saniplus , Sanitop , Sanipack , Sanibest. New models ( Sanispeed , Sanicompact, Sanicubic, Sanicom and Sanicondens) were released in August 2004 to address the requirements of the commercial sector. We also have specialised units for marine use. Testing on the Saniflo ranges has been carried out by NATO, the Atomic Energy Authorities, the Oceanographic Institute, Antarctic Research Station, Military Camps, various constructions sites, as well as for the provision of facilities for the elderly, disabled and persons convalescing.
Furthermore, Saniflo products are generally submitted for testing and approval by SAI-Global (previously Standards Australia), under MP52 Spec 101, 2002 (Certificate No: PST20041) as being fit for purpose. This independent third party endorsement of our products confirms our commitment to quality of product and service as evidenced by our full guarantee, supporting technical support and nationwide network of service engineers. Our Pursuit of service excellence to our customers is ongoing and supported by our manufacturing facility having full ISO 9001:2001 Quality Assurance accreditation.