The whole system of the flour mill consists of main unit, deceleration machine, classifier, blower, hammer crusher, dustpan elevator, electro-magnetic vibrating feeder, impulse dust cleaner, piping device, cyclone collector device, classifier, high-pressure motor and muffler.
The main motor drives main axle and every layer rotating by reducer. Dail drives numbers of rollers rolling and rotating in the ring by pintles.
Big materials are crushed into smaller particles by hammer crusher. Then they are sent to store house by elevator. The electro-magnetic vibrating feeder send the materials evenly to the middle of the upper dial. Under the function of the eccentricity, the materials scatter to the side of the circle and fall into the ring to be pressed, crushed and milled into pieces by rollers. After the first crush, materials fall into the second and the third layer. The pumping of the high-pressure centrifugal blower put the outside air into the machine. The coarse powder will be brought into the classifier.
Model : SCM6015 , SCM8021 , SCM1027
Roller number: 15, 21, 27
Diameter (mm) : F600, F800 , F1000
Main unit speed(mm):235,235,235
Max. feeding size(mm):10, 10, 10
Final size (mesh): 325-2500, 325-2500, 325-2500
Capacity (kg/h): 350-2500, 600-4000, 900-6000
Overall dimension (m): 10×2×5.5, 12.4×2.5×5.8, 14.5×3.8×6.3