Australia's #1 industrial directory for equipment & suppliers

Self Priming Sewage Pump | Gorman-Rupp T10A3S-B

Supplier: Hydro Innovations

The T10A3S-B is the largest in the Gorman-Rupp range of “Super T Series” cast iron self-priming sewage and trash pumps

CONTACT THIS SUPPLIER TO FIND OUT MORE

The Gorman-Rupp T10A3S-B is a high volume self priming sewage pump, able to handle solids in suspension very well, including spherical solids up to 76mm diameter and even stringy materials such as rags, gloves, feathers and plastic bags. It does this better than most solids handling wastewater pumps because of its unique self cleaning wear plate system. Also, because it can be mounted “high and dry” above the wet well, monitoring and maintenance of this pump is much easier for operators, and chokes are easier to remove.

This pump’s industry leading reliability makes it the ideal choice for continuous, unattended, automatic operation. The ability to re-prime for a “self-priming” pump is also extremely important for unattended operation, and this pump is able to re-prime to 6.7m at its maximum speed of 1450rpm, and can even re-prime to 5.2m at a speed as low as 950rpm.

Advantages:

  • It handle solids in suspension very well, including spherical solids up to 76mm diameter and even stringy materials such as rags, gloves, feathers and plastic bags.
  • It does this better than most solids handling pumps because of its unique self cleaning wear plate system.
  • It can be mounted “high and dry” above the wet well, monitoring and maintenance of this pump is much easier for operators, and chokes are easier to remove.

As additional protection against choking when an application involves the handling of heavy loads of stingy materials [such as “wet wipes” or large quantities of rags], Gorman-Rupp have developed the new “Eradicator™” Solids Management System. The Eradicator™ system features an aggressive self-cleaning wear-plate incorporating a number of notches and grooves, as well as a patent pending lacerating tooth that helps break up stringy materials, scrape them off the impeller vanes and pass them through the pump - all without impacting performance or interrupting service. The T10A3S-B when fitted with the “Eradicator™”

Find out more about:

If you have any questions please call Hydro Innovations on (02) 9898 1800 or email us

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more