The Model X80 transmitter digitally communicates with any ECD Model S88 or S80 Intelligent Sensor, automa2cally configuring the transmitter’s menus and display screens to the measured parameter. The same transmitter can be used for any of the measurements, i.e. plug an S88 Conductivity Sensor into a Model X80 pH transmitter and it will automatically reconfigure into a conduc2vity transmitter. There is no longer any need to inventory mul2ple instrument types, the one Model X80 transmitter will automatically configure to any of the listed measurements.
The Model S88 Intelligent Sensors facilitate two way communication with the Model X80 transmi3ers. The type of sensor, identity and serial number are stored in the sensor’s memory along with calibration registers. The Model S88 sensors are calibrated at the factory so they are ready to use when connected to a Model X80 transmi3er. The Model S80/S88 sensors are waterproof and submersible with all internal components epoxy encapsulated inside the ¾” O.D. housing. The Model S88 sensors use the same field proven, easily replaceable electrodes as the Model S10, S17, S80 sensors saving time and money.
The Model X80 Transmitter features a large easily viewed LCD display. Loop powered instruments have Black le3ering on a Grey background, while the 24 VDC powered instruments have blue le3ering on a white background when the LED backlight is on. The Model X80 has three easily switchable Main Display screens; the Data Screen, the Millivolt Screen and the Graphical Display screen. (six screens for two channel units) The Data Screen displays the measurement type, the measured value with units, the % milliamp output of the 4-20 mA channel and the temperature. The mV Screen displays the measurement type, the raw millivolt signal from the sensor, the % milliamp output of the 4-20 mA channel and the temperature. The Graphical Screens display the measurement type, the measured value with units and a graphical representation of the % milliamp output. Three graphical styles are available; a Trend line, a Bar graph or a Gauge. The status of alarm relays, energized/de-energized is displayed on transmitters with relays.
AMS Instrumentation & Calibration Pty Ltd (AMS) has been in existence for more than 38 years supplying calibration equipment and industrial instrumentation to all industries. With more than 225 years ...