Its high lubricant ejection pressure of 25 bar opens a wide range of applications not possible with conventional systems.
Memolub® can be used remotely up to 8 metres from the lubrication point. Remote installation avoids dangerous or difficult access points, and maintenance personnel can work swiftly in safety.
Machine stoppage for lubrication can be avoided by installing Memolub® systems. Memolub® can also be used as a mini central lubrication system. Combined with progressive distributor blocks, Memolub® Systems are a simple and economical way of reducing maintenance costs.
- Long term equipment protection
- Less machine failures
- Reduction of mechanical failures
- Maintenance cost reduction
- Easy control function
- Improved lubrication organisation
- Critical components
- Difficult or dangerous access points •
- Precise lubrication
- Frequent re-lubrication intervals
Memolub® HPS (High Pressure System) lubrication dispensing units are available in 120cc, 240cc and 480cc capacity. The HPS pumping units is powered by a 4.5volt battery pack. The HPS/EX is suitable for gaseous environments (zone 2 and 22) and is powered by a 4.5volt battery pack. The HPS/EPS is an externally powered system which can be supplied as a 4.5, 12 or 24volt unit. The HPS/PLC is a 24volt externally powered unit can be programmed/operated via programmable-logic-controller (PLC).
Replacement cartridges can be filled with only oil or grease up to NLGI 2/3 grade.