Australia's #1 industrial directory for equipment & suppliers

Smart Tools – VAC Set

Supplier: Testo Australia

The testo Smart VAC Set provides a combination of four instruments needed to test and balance a multi outlet ventilation system. Two types of anememoters give you the capacity to measure in-duct air flow and the flow from each vent.

CONTACT THIS SUPPLIER TO FIND OUT MORE

Advantages of the testo Smart Tools VAC set

The measuring instruments in the testo Smart Tools VAC set can be connected quickly and easily to your smartphone or tablet via Bluetooth. You can therefore measure air velocities, humidity, volume flows and temperatures with intuitive ease using the testo Smart Tools App. The measuring instruments are easy to transport in the handy testo Smart Case and always to hand when needed.

Advantages and applications of the individual measuring instruments:

testo 405i: thermal anemometer with smartphone operation

- Measurement of air velocity, volume flow and temperature
- Simple configuration of the dimension and geometry of the duct cross-section for measuring the volume flow
- Telescopic tube which can be extended to 400 mm

testo 410i: vane anemometer with smartphone operation

- Measurement of air velocity, volume flow and temperature
- Display of the volume flow of multiple outlets in order to adjust systems
- Easy parametrization of the outlet (dimension and geometry)

testo 605i: Thermohygrometer with smartphone operation

- Measurement of air humidity and temperature in rooms and ducts
- Automatic calculation of the dew point and wet-bulb temperature

testo 805i: infrared thermometer with smartphone operation

- Non-contact infrared measurement of surface temperature
- Measuring spot marking via highly visible 8-point laser circle
- Easy selection of emission level via stored materials list
- Image documentation with readings and measuring spot marking

Practical App with special functions for measurement data analysis on your smartphone or tablet

Measurement data is transmitted wirelessly from the relevant measuring instrument to the testo Smart Tools App and can be viewed conveniently on mobile terminal devices – either as a chart or in table form. The App also offers practical functions such as timed and multi-point mean calculation, volume flow configuration, comparison of several volume flows at various outlets, automatic calculation of the dew point and wet-bulb temperature and identification of areas susceptible to mould via a clear traffic light system. The measurement data log can be emailed directly as a PDF or Excel file. This saves you time, allowing you to further increase your efficiency.

System requirements:

iOS 8.3 or later
Android 4.3 or later
Bluetooth 4.0

What's Included: testo 405i, testo 410i, testo 605i, testo 805i, testo Smart Case (VAC), batteries & calibration protocol.

 

Technical Data

  testo 405i testo 410i testo 605i testo 805i
Instrument Sensor Hot wire Vane Humidity – capacitive Infrared
Measuring range 0 to 30 m/s 0.4 to 30 m/s 0 to 100 %RH -30 to +250 °C
Accuracy ±1 digit ±(0.1 m/s + 5 % of m.v.)
(0 to 2 m/s)
±(0.3 m/s + 5 % of m.v.)
(2 to 15 m/s)
±(0.2 m/s + 2 % of m.v.)
(0.4 to 20 m/s)
±(1.8 %RH + 3 % of m.v.)
at +25 °C
(5 to 80 %RH)
±1.5 °C or ±1.5 % of
reading 0 to +250 °C)
±2.0 °C (-20 to -0.1 °C)
±2.5 °C (-30 to -20.1 °C)
Resolution 0.01 m/s 0.1 m/s 0.1% RH 0.1 °C
Sensor type NTC NTC NTC -
Measuring range -20 to +60 °C -20 to +60 °C -20 to +60 °C -
Accuracy ±1 digit ± 0.5 °C ± 0.5 °C ±0.8 °C (-20 to 0 °C)
±0.5 °C (0 to +60 °C)
-
Resolution 0.1 °C 0.1 °C 0.1 °C -
Compatability

Requires iOS 8.3
or newer/
Android 4.3
or newer

Requires mobile
end device with
Bluetooth 4.0

Requires iOS 8.3
or newer/
Android 4.3
or newer

Requires mobile
end device with
Bluetooth 4.0

Requires iOS 8.3
or newer/
Android 4.3
or newer

Requires mobile
end device with
Bluetooth 4.0

Requires iOS 8.3
or newer/
Android 4.3
or newer

Requires mobile
end device with
Bluetooth 4.0

Storage temperature -20 to +60 °C -20 to +60 °C -20 to +60 °C -20 to +60 °C
Operating temperature -20 to +50 °C -20 to +50 °C -20 to +50 °C -10 to +50 °C
Battery type 3 micro
batteries AAA
3 micro
batteries AAA
3 micro
batteries AAA
3 micro
batteries AAA
Battery life 15 hrs 200 hrs 250 hrs 30 hrs
Dimensions

200 x 30 x 41 mm

Telescope extendable
to 400 mm

154 x 43 x 21 mm

40 mm Vane diameter

243 x 30 x 24 mm

100 mm probe shaft

 

140 x 36 x 25 mm
Optics - - - 10:1
Laser marketing - - - Diffractive optics
(laser circle)
Emissivity - - - 0.1 to 1.0 adjustable

Testo Smart - VAC Set

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more