150 and 270LPM pumps are supplied with 2″ BSPMF external Check Valve
All threads are BSPP on Pump Ends, Check Valves and Flow Switches. 316 motors are available on request. For river, creek or dam applications install 316SS motors with mechanical seals are recommended. Controllers are outdoor rated to IP65. Array and Panel pricing is separate. Arrays are available in Ground Mount, Pole Mount and Pole Mount.
SAVE MONEY ON PANELS – A Solar Bore Pump requires minimum Solar Panels compared to a normal electric bore pump, saving you money!
How the Solar Pump Works
The SubDrive Solar system provides water in remote applications where electrical grid power is either unreliable or unavailable.
The system pumps water using a high-voltage DC power source such as an array of solar panels. Since the sun is only available during certain hours of the day and only in good weather conditions, the water is generally pumped into a storage tank.
Two level switches can be installed inside the tank to regulate the water level. A flow switch detects if flow is below critical levels while the pump is still running. This serves as an indication that the well/ bore has run dry, or that insufficient power is available to continue pumping. The system will shut down to protect the pump and motor until the well/bore, or adequate electric power, has recovered.
The SubDrive Solar controller runs at variable speeds to match the changing power available from the PV solar array. Variable speed operation means there is no in-rush or surge of energy during the pump/motor start-up, helping to eliminate wear on the motor and pumping system. A leading cause of pump motor failure is the stress applied to the motor during a full voltage start-up. The SubDrive Solar variable speed operation ramps up the speed smoothly, which eliminates starting stress. This feature enhances long-term motor reliability. The SubDrive Solar QuickPAK products include diagnostic features and built-in protection from potentially harmful conditions including:
Infield tested and designed to withstand tough Australian conditions, SubDrive Solar utilises Franklin’s well proven and quality products:
Standard 4″ pump
Standard 4″ motor
SubDrive Solar Controller
30, 45, 70, 150 & 270LPM
Max 200M head
High Flow System for faster tank fill and significant water output
Proven pump and motor technology and reliability
DC and AC power inputs with auto-switching to generator back-up
Allows the use of new solar array or retrofit to existing array (subject to size and performance check)
Strongman Pumps | Online sales of Water Pumps IndustrySearch Trusted Supplier
We are an Australian business that ship pumps daily Australia Wide from various locations around Australia with no charge to the customer.
2007 - Started selling OEM Bore Pumps and the business name ...