Industry Search Australia Trusted by 600,000+ buyers

Solid Edge and Teamcenter improves efficiency & service

Supplier: EDGE plm software By: Siemans
17 October, 2013

The use of Solid Edge and Teamcenter improves collaboration and efficiency, allowing machine builder to offer a superior level of customer service

Industrial Control Associates, Inc. (ICA) is a systems integrator and machine builder specialising in programmable logic control (PLC) system machines. The company provides custom-fabricated machinery and control panels, complete electrical/mechanical installation and turnkey integration, custom robotics, motion applications, machine modifications and enhancements, and nondestructive testing systems for companies in a wide range of industries. Its services include engineering, design, construction and start-up support.

ICA competes successfully in a tight market against much larger organizations. When asked how such a lean operation can win orders from companies such as Magna, Voight Aircraft, Citation, Cooper Tire & Rubber Co., DuPont Chemical, Procter & Gamble Paper Products and Tyson Foods, ICA’s CEO Brian Hare responds, "In part, it’s because we have some top-notch machine and systems designers. It also helps that while we may be small in size, we present a large-company image."

Hare notes that a key element of the large-company image is product lifecycle management (PLM) technology. ICA’s PLM system is based on Solid Edge software for accelerated design and tEAMCENTRE software (preconfigured for rapid development and fast return on investment) for a single source of collaborative decision support. Both solutions are from Siemens PLM Software. "When prospective customers come here to visit, particularly if they’re from large companies, they are surprised to see that we have the same type of technology they’re using,” says Hare. "It inspires confidence right from the start."


  • Competition from larger companies
  • Technically advanced customers
  • Challenging economic climate
  • New product development
  • Production efficiency

ICA has been using Solid Edge for nearly 10 years. The company chose Solid Edge following a three-way trial that also included SolidWorks® software and Inventor® software. Each program was timed in the creation of a 10-part assembly. "Inventor couldn’t do it, SolidWorks never completed it, but Solid Edge did and was the clear winner," explains Hare. "In addition, the Solid Edge draft environment is far superior to SolidWorks."

The use of Solid Edge has improved operations at ICA in a number of ways. Using Solid Edge to increase the accuracy of machine designs has reduced the amount of rework the company performs. "Prior to Solid Edge, our remanufacturing rate was 20 percent,” Hare says. "Now it’s only two percent.” That represents a significant cost savings, which is particularly important now, during difficult economic times. Using Solid Edge has also helped the company reduce by 33 percent the time it takes to complete a job. This has been important in meeting customers’ requirements for ever-faster delivery.

Hare expects to save even more time as ICA increases its use of the synchronous technology capability of Solid Edge.

"When we design testing machinery, we need to use the customer’s assembly data no matter what system it was designed in," he says. "By allowing us to bring in and work on data from any CAD system, Solid Edge with synchronous technology will save us the time it takes to redraw that geometry. By doing small design tests through parallel work in synchronous technology and traditional modeling, we have seen as much as a 30 percent reduction in the design phase. We expect that number to increase as the company gets farther along the learning curve.”

Keys To Success:

  • Solid models of machine designs
  • Ability to use customers’ CAD data regardless of format
  • Fast data searches
  • Visualization technology that enhances collaboration
  • Good technical support


PLM is the differentiator

When it comes to satisfying existing customers and impressing prospects, solid modeling only goes so far, according to Hare. "Everyone who does this type of work has some type of solid modeling software,” he explains. "Having modeling alone doesn’t bring enough to the table for new customers. Closing the loop with Teamcenter rapidly brings us closer to being a true partner in the customer’s future.

"To my knowledge, we’re the only company of those we compete with to implement PLM,” Hare continues. "The larger automotive companies and government organizations understand the implications this holds for them as a customer. By implementing Teamcenter, we’re showing that we can understand and meet their needs.”

Using Teamcenter improves ICA’s ability to meet customers’ needs in a variety of ways. For example, by using the software to manage revisions, releases and data (Solid Edge data, customers’ AutoCAD drawings, PDFs, quote documents, conceptual drawings, pictures and other background material), ICA is more organized – something that customers see immediately in the improved quality of drawings and bills of materials (BOMs). Now that there is just one repository for all product data, searches for specific information are very fast; 30 seconds versus 10 minutes in the past. ICA can answer a customer’s question, even about a system that was designed years earlier, while the customer is still on the phone. Also, ICA has begun automating paper-based processes such as design release (using the workflow functionality of Teamcenter), helping ensure compliance with best practices and regulatory requirements.

The most important benefit of using Teamcenter and PLM, however, is the collaboration aspect. "The Teamcenter visualization capabilities make it a lot easier for customers to view an assembly," says Hare.

"This can be done in 30 seconds instead of 30 minutes using the CAD system.” Hare envisions holding frequent "mini design reviews” with customers throughout the design process. "We’re looking forward to letting our customers look at designs at key times so that they understand what they’re getting early on," he explains.

"They've never had that ability to look at something before seeing the approval drawings, and it has caused substantial waste. Using Teamcenter, they can see early on if we’re going in a wrong direction and raise a flag."

The web-based collaboration tools of Teamcenter make this scenario possible no matter where the customer is located.

ICA will be using Teamcenter as part of its preparation for ISO certification. Throughout the company's PLM implementation, it has appreciated the support from Siemens. "We’re doing all of this without an IT person on staff, and we’ve had great support from Siemens and its channel partner, Saratech, here in Georgia,” Hare says.


  • Ability to win business from large, sophisticated companies
  • Time-to-market decreased by 33 percent
  • Remanufacturing rate down from 20 percent to 2 percent
  • Data retrieved while a customer is on the phone
  • Customers can visualize designs in 30 seconds versus 30 minutes previously