Economy Rubber Speed Hump are an economical alternative to more expensive models.
- Ideally suited to low traffic environments such as unit and town house developments or for short term installations.
- Manufactured from a mixture of natural and recycled rubber.
- When laid in an alternating pattern they conform to AS 2890.1:2004
- Can also be used as a liquid bunding if installed with a sealant. e.g. silastic.
- Can be used with or without end caps.
- Comes complete with all concealed fixings that remain accessible.
- Built in bridge design to accommodate a cable or hose.
- Solid colour won't chip or wear.
- Material: Recycled and Natural rubber.
- Solid colour with moulded surface.
Slo-motion HEAVY DUTY Steel Speed Hump is the modular steel speed control system for seriously heavy vehicle applications (including 'B' - Doubles). Perfectly suited to transport depots, factories, terminals etc.
- Super strong chassis construction with 6mm floor plate and 6 bolt fixing make our Slo-Motion Heavy Duty virtually indestructible.
- Designed to comply with AS 2890.1:2004.
- Five year structural guarantee (conditions apply).
- More than 4 times the load bearing contact area with the road surface than competitive products.
- Use with or without end caps.
- Truly independent modules for easy removal.
- Does not require a rubber underlay to prevent rattle.
- Concealed fixings remain accessible.
- Modules have a built in bridge design to accommodate hoses or cables.
- Top skin: 6mm floor plate
Slo-motion STANDARD DUTY Steel Speed Hump is a modular steel speed control system consisting of truly independent super strong steel modules. The ends of each speed hump are finished off with a pair of end caps. These rounded end caps are moulded from an extremely durable rubber.
- Suitable for car parks, shopping centres or factory complexes.
- Designed to comply with AS 2890.1:2004.
- Five year structural guarantee (conditions apply).
- More than 4 times the load bearing contact area with the road surface than competitive products.
- Can be used with or without end caps.
- Truly independent modules for easy removal.
- Does not require a rubber underlay to prevent rattle.
- Comes complete with accessible consealed fixings.
Traffic Calming Rubber Speed Hump Designed for situations where traffic speed needs to be controlled but a traditional speed hump is not suitable. Smoother approach and departure angles mean a wider range of vehicles can pass over them.
- Solid rubber construction means these traffic calmers are capable of handling heavy traffic.
- Safety yellow anti-slip insert panels increase visibility & improve pedestrian safety.
- Full load bearing contact area with road surface.
- Convenient modular system can be configured to any length.
- All modules supplied with fixings.
- Concealed fixings remain accessible.
- Highly shock absorbent rubber is both quiet and smooth in operation.
- Rubber construction conforms to uneven surfaces.
Middle sections fitted with high visibility non-slip panels. - Solid natural and recycled rubber.
- Moulded black rubber with yellow panels.
Speed Hump - Slo-Motion 'Compliance' System is made from Linear Low Density Polyethylene (LLDPE).
- Slo-Motion 'Compliance' is the only moulded speed hump system on the market that is fully manufactured in Australia, and is designed to comply with AS2890.1:2004.
- Modules are moulded from tough virgin grade LLDPE with colour that goes right through.
- LDPE is quiet to drive over, won't crack, rot or rust and is UV stabilised for extended exposure.
- Each end module has recessed fixing points and is moulded in a half round design to complete the speed hump.
- Suitable for heavy use in carparks, shopping centres or factory complexes.
- Rubber Speed Cushions are made from recycled rubber.
- Lighter and easier to work with than asphalt and concrete, significantly minimizing the number of hours that need to be invested to install the solutions.
- Rubber pieces can be pulled up and moved without being destroyed.
- Convenient for municipalities who want to institute temporary measures to test an area or permanently control traffic speed.
- Unlike concrete and asphalt which necessitate frequent and high cost replacement, rubber products are long lasting and cost-efficient.
- In addition to long term benefits, rubber products offer a quick, easy way to install solutions when timing is key.
The "Blade Runner" one way access spikes BRS1000 and BRS500 consist of either a 1000mm or 500mm heavy duty steel module and steel end caps.
- Each module has independently retracting teeth. When a vehicle approaches from the correct direction the teeth simply retract, allowing the vehicle to pass freely.
- When approached from an unauthorised direction, the teeth lock up denying access and risking almost certain tyre damage.
Key features of the "Blade Runner" one way access spikes include,
- High visibility lime green powder coat finish and an ultra low profile construction to ensure adequate vehicle clearance.
- Designed to provide a soft approach for vehicles due to its low ramp angle and reduced height.
- hese same features also eliminate much of the noise commonly associated with older style products.
- Up to 8 fixing points per metre (4 per 500mm module), heavy steel construction, steel end caps and revolutionary new spring design ensure a long service life with low maintenance.
Blade Runner One Way Access Spikes PDF
